Chapter 7
ALESIS ML-9600 REFERENCE MANUAL 41
CD MODE OPERATION
7.1 CD PLAYBACK
In addition to being a full-featured mastering hard-disk recorder and CD burner, the ML-9600 is of
course also a great sounding Compact Disc playback machine. With the HD/CD switch set to CD, the
ML-9600 provides you with standard CD player controls, such as play/pause, stop, forward and
reverse scan, and forward and reverse skip.
7.1A PLAYING A RED BOOK CD
Press OPEN/CLOSE to eject the tray, and insert a disc. Push OPEN/CLOSE again to close the tray, and
the CD will be scanned for TOC information. Pressing the HD/CD button to select CD will place the
transport controls in control of the CD player, acting like a standard CD player would.
7.1B PLAYING A CD24 CD
Press OPEN/CLOSE to eject the tray, and insert a disc. Push OPEN/CLOSE again to close the tray, and
the CD will be scanned. If the CD24 format is detected, the player will read the information that lists
sample rate, word length, and start times for each of the files on disc. Pressing the HD/CD button to
select CD will place the transport controls in control of the CD player, acting like a standard CD player
would.
7.2 COPYING TRACKS FROM CD TO HARD DRIVE
The MasterLink gives you the ability to move audio from either a Red Book or from a CD24 CD on to
the hard drive into the currently selected Playlist. Press OPEN/CLOSE to eject the tray, and insert the
disc whose track you wish to copy. Make sure the HD/CD button is set to CD, then select the CD track
you want by using the SKIP buttons. After you have selected the track you want, press the TRACK
MOVE button, and you will see this message (assuming you have selected CD track 01):
Figure 7.2.1
CD Track Move Display
In this display, the second line of the 2X16 display changes to show "Move (source track)>
destination track)". The cursor will be under the "destination track", and the source track will be
the number of the Track you have currently selected. Pressing the UP/YES and DOWN/NO keys will
scroll through the possible destination track numbers. Once the destination track number has been
selected, pressing TRACK MOVE again will complete the move.
7.3 MOVE ENTIRE CD TO PLAYLIST
The Move CD to Playlist function is accessed through the TRACK MOVE button while the MasterLink
is in CD mode. Like the CD Track Move function, the Move CD function moves tracks from the CD
To Next Page
Loading...
Need help?
Audio Specifications
Weight and Dimensions
