EasyManuals Logo

Alesis MASTERLINK ML-9600 Reference Manual

Alesis MASTERLINK ML-9600
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Chapter 4
ALESIS ML-9600 REFERENCE MANUAL 19
Choose the destination Track and press TRACK MOVE causing the display to prompt "Are You
Sure?". Pressing UP/YES will complete the move, any other key will cancel the move.
4.7C DELETING AUDIO FILES
To delete an Audio File from the hard drive, you must currently have that Audio File selected in the
display (press SKIP
until you are past the last Track in the playlist). Pressing the DELETE TRACK
button will force the unit to check all 16 playlists for instances of the current Audio File. If the Audio
File is used in any playlist, this error will be displayed temporarily:
Figure 4.7.3
Audio File In Use Warning
where, in this case, Playlist 01 is the first playlist to include the current Audio File. After temporarily
displaying the "Audio File In Use" screen, the override screen will be displayed, as shown in Figure
4.7.4.
Figure 4.7.4
Audio File Delete Override Screen
Pressing UP/YES while this screen is displayed will cause the display to prompt "Permanently
delete from disk?"; pressing UP/YES once more will delete the Audio File and all Tracks
associated with that Audio File.
If there are no playlists using the current Audio File, this warning will be displayed:
Figure 4.7.5
Delete Audio File Confirmation
where Song 01 is the name of the Audio File to be deleted. Pressing DOWN/NO will cancel the
operation and return the unit to its previous state. Pressing UP/YES will cause a confirm delete page to
be displayed, as shown in Figure 4.7.6:

Table of Contents

Other manuals for Alesis MASTERLINK ML-9600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alesis MASTERLINK ML-9600 and is the answer not in the manual?

Alesis MASTERLINK ML-9600 Specifications

Audio Specifications IconAudio Specifications
ADC24-bit 128X oversampling
DAC24-bit 128X oversampling
Sample rates supported44.1kHz, 48kHz, 88.2kHz, 96kHz
Word lengths supported16-, 20-, and 24-bit
Analog I/O IconAnalog I/O
Frequency response at 44.1kHz/48kHz20Hz – 20kHz +0dB, -0.3dB
THD+N at 44.1kHz/48kHz<0.002% @1kHz, -1dBFS
Signal-to-noise ratio at 44.1kHz/48kHz113dB, A-weighted
Digital I/O IconDigital I/O
Supported protocols type IIEC 958
Supported protocols balancedAES/EBU
Supported protocols coaxialCoaxial
Weight and Dimensions IconWeight and Dimensions
Height3.5"/2U
Width17"
Depth11"

Related product manuals