EasyManuals Logo

Alesis MASTERLINK ML-9600 Reference Manual

Alesis MASTERLINK ML-9600
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Saftey Notices
ALESIS ML-9600 REFERENCE MANUAL IX
INFORMATION TO THE USER FOR CLASS A DIGITAL DEVICE
(FCC PART 15, CLASS A)
This equipment has been tested and found to comply with the limits for a class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference in which case the user will be required to
correct the interference at his own expense.
The user is cautioned that changes and modifications made to the equipment without the approval of
manufacturer could void the user’s authority to operate this equipment.
Use only shielded and grounded cables with this equipment to ensure compliance with FCC Rules.
INDUSTRY CANADA (DIGITAL APPARATUS) INTERFERENCE-
CAUSING EQUIPMENT STANDARD
ICES-003 ISSUE 2
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
NOTICES REGARDING LASER DEVICES.
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
THIS PRODUCT CONTAINS A CLASS 1 LASER DEVICE AND COMPLIES WITH TITLE
21, SECTIONS 1040.10 AND 1040.11 OF THE UNITED STATES CODE OF FEDERAL
REGULATIONS

Table of Contents

Other manuals for Alesis MASTERLINK ML-9600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alesis MASTERLINK ML-9600 and is the answer not in the manual?

Alesis MASTERLINK ML-9600 Specifications

Audio Specifications IconAudio Specifications
ADC24-bit 128X oversampling
DAC24-bit 128X oversampling
Sample rates supported44.1kHz, 48kHz, 88.2kHz, 96kHz
Word lengths supported16-, 20-, and 24-bit
Analog I/O IconAnalog I/O
Frequency response at 44.1kHz/48kHz20Hz – 20kHz +0dB, -0.3dB
THD+N at 44.1kHz/48kHz<0.002% @1kHz, -1dBFS
Signal-to-noise ratio at 44.1kHz/48kHz113dB, A-weighted
Digital I/O IconDigital I/O
Supported protocols type IIEC 958
Supported protocols balancedAES/EBU
Supported protocols coaxialCoaxial
Weight and Dimensions IconWeight and Dimensions
Height3.5"/2U
Width17"
Depth11"

Related product manuals