APPENDIX
B
ALF Instruction Manual UM_Filter_100B03
Page 62 of 67
12.1.14.3 Settings -> 9 Password/LogIn -> 3 Change user pw (if there is
no user password e.g. First start)
Figure 66
12.1.14.4 Settings -> 9 Password/LogIn -> 3 Change user pw (if user
password exists)
Figure 67
12.1.14.5 Settings -> 9 Password/LogIn -> 4 Change service pw (if
logged with service password)
Figure 68
12.1.14.6 Settings -> 9 Password/LogIn -> 4 Change service pw (if not
logged with service password)
Figure 69
12.1.15 Settings -> 10 Set contrast
Following settings is used to adjust contrast for HMI screen. It is done by following instructions on
the screen.
Figure 70
_ _ _ P A S S W O R D _ _ _ _ _ _ _ _
E n t e r n e w p a s s w o r d
* - - -
_ _ _ P A S S W O R D _ _ _ _ _ _ _ _
E n t e r o l d p a s s w o r d
* - - -
_ _ _ P A S S W O R D _ _ _ _ _ _ _ _
E n t e r o l d p a s s w o r d
* - - -
Y o u a r e n o t
a u t h o r i z e d t o
p e r f o r m t h i s a c t i o n .
- C h e c k l o g i n l e v e l !