7.1 Check points 7 Operating routine
52
7.1 Check points
7.1.1 Before start
1. Check that the hook bolts of the outlet, the
screws of the frame hood and the centring
ring are all tightened.
2. Check that inlet device is tightened.
3. Check the oil level.
7.1.2 Start and run-up
4. Start the separator.
5. Check the direction of rotation of the bowl
(see revolution counter).
G0764811
S0118021S0118111S0117911
OFF
START
ON
S0121111S0118211