7.1 Check points 7 Operating routine
54
7.1.5 Stop
Do not stop separator uncleaned, since it will lead
to that manually cleaning has to be done before
start up.
The bowl must be closed and filled with liquid
during the run down period. Water is fed to the
axial seals automatically until the bowl has
stopped.
9. Stop the separator.
The brake is automatically energized. The cooling
water is shut off and the brake is disengaged
automatically when the bowl has stopped.
WARNING
Do not loosen any parts on
the machine until the bowl
has stopped completely
(= the revolution counter is at a
stand still).
DANGER
Emergency stop
If the machine begins to vibrate during
operation, stop it immediately keeping the
bowl filled with liquid.
S0050111G0246241
To Next Page
Loading...
Need help?
General
