8138 SIP Multicolor Strobe Light
Additional Features Tab – Emergency Alerts
Emergency Alerts allow for an announcement (chosen strobe to be triggered & latched by
calling a pre-configured Emergency extension and hanging up. The announcement will
continue to flash a light pattern until a different "Cancel" extension is called to clear the
announcement (or a defined timeout is reached). The Emergency Alerts are useful for
emergency notifications (e.g. evacuation, lock down, medical emergency, etc.), allowing
staff to quickly dial a pre-configured number under such circumstances.
If the “Answer Inbound Call” option is “Enabled” the call is auto-answered and a
confirmation tone is played through multicast (if configured) before starting the alert. If
“Disabled”, the alert is triggered just by the inbound ring, without answering the call. (In
both instances, the announcement will stay active until the time limit is reached or the
“Cancel Extension” is called). The auto-answering option can be useful when the caller
cannot hear announcement from their location. However, in instances where the call might
Document 90-00102C
11/27/2019
Page 29
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
