ALIBI ALI-NS8014VR - Installation with the ALI-RM10 Mounting Bracket

20
Network (LAN) cable
Connect the network Ethernet drop cable to a recorder (NVR) or router (switch) through. A Waterproof Ethernet Fitting is provided
for the LAN drop cable; see “APPENDIX C Waterproof Ethernet Fitting Installation” on page 35 for more information.
Power cable
You can power the camera directly with the 12 Vdc power adapter provided, or with Power over Ethernet (PoE). Refer refer to the
Specications for powering requirements. If using a power extension cable, ensure that the voltage provided at the camera is within
the specied range.
2.7 Installation with the ALI-RM10 Mounting Bracket
To be provided.
SECTION 2: INSTALLATION