iv
Cautions
• Make sure the power supply voltage is correct before using the product.
• Do not drop the product or subject it to physical shock. Do not install the product on vibrating surfaces.
• Do not install it in an environment with high electromagnetic radiation.
• Do not aim the lens at the strong light such as sun or incandescent lamp. Strong light can damage the image sensor.
• The sensor may be burned out by a laser beam. When any laser equipment is being used, make sure that the lens is not
exposed to the laser beam.
• Please refer to the specication manual for environmentally requirements.
• To avoid heat accumulation, good ventilation is required for a proper operating environment.
• The product should be packed in its original packing when shipping.
• Do not touch the camera dome cover directly. Acidic sweat of the ngers may erode the surface coating of the product cover.
• Please use a soft and dry cloth when cleaning the inside and outside surfaces of the dome cover.
• Do not use alkaline detergents.
Read these instructions and keep them in a safe place for future reference.
• Save your system conguration.
• Distributing, copying, disassembling, reverse compiling, reverse engineering, and exporting, in violation of export laws, the
software provided with this product is expressly prohibited.
To Next Page
Loading...
