AlienTech K-TAG Master - Checking the package contents

12
Version 1.01
Checking the package contents
The basic kit supplied with K-TAG includes:
□ 1 K-TAG tool in Master or Slave version
Slave version (left) and Master version (right)
□ 1 AC adaptor with interchangeable international plugs 1400SWALIM
□ 1 Jumper cable 144300K218 □ 1 10-pin female polarized IDC connector
□ 1 USB Cable □ 1 Cable 14P600KT02 □ 2 Ribbon cables 144300T100
□ 2 Ribbon cables 144300T101 □ 2 Ribbon cables 144300T102
□ 2 Ribbon cables 144300T103 □ 2 Rainbow ribbon cables 144300T104
□ 2 Rainbow ribbon cables 144300T105 □ 2 Rainbow ribbon cables 144300T106
□ 1 Adapter 14AS00T01S □ 1 Adapter 14AS00T03S □ 1 Adapter 14AS00T04S
□ 8 male pin header (1.27mm pitch) □ 8 female pin header (2.54mm pitch)
□ 1 kit AT3401001 with 2 male pin header (2.54mm) and 10 female pin header (2.54mm)
□ 1 K-TAG case
If any items are missing, please contact Alientech Srl by writing an email at info@alientech.to,
providing your Customer Code and Serial Number of the tool, or your dealer providing the Serial
Number of the tool.
Always keep the original packaging. In case of repair, the tool must be returned in its suitcase,
complete with all accessories.