Replacing the top-cover
assembly
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before working inside your computer.
After working inside your computer, follow the instructions
in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Slide the lighting cable through the slot on the chassis.
2 Align the tabs on the top cover with the slots on the chassis and snap the
top cover into place.
3 Connect the lighting cable to the top cover.
4 Replace the screws that secure the top cover to the chassis.
Post-requisites
1 Replace the right-side cover.
2 Replace the left-side cover.
32
To Next Page
Loading...
