Alienware Aurora R5 - Replacing the Antenna; Procedure; Post-requisites

Replacing the antenna
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before working inside your computer.
After working inside your computer, follow the instructions
in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
1 Adhere the antenna to the chassis.
2 Route the antenna cables through the routing guides on the chassis and
slide the cables through the cable-routing slot on the chassis.
3 Route the antenna cables through the routing guides inside the chassis.
4 Connect the antenna cables to the wireless card.
Post-requisites
1 Replace the top cover.
2 Replace the right-side cover.
3 Replace the left-side cover.
87