Alinco DR-620 - Radio Specifications; General Specifications; Transmitter Specifications

SPECIFICATIONS
1) GENERAL
Frequency coverage
DR-620T (U.S amateur)
DR-620E (European amateur)
Operating mode
Frequency resolution
Number of memory channels
Antenna impedance
Power requirement
Ground method
Current drain Receive
Transmit
Operating temperature
Frequency stability
Dimensions
Weight
2) TRANSMITTER
Output power
Modulation system
Maximum frequency deviation
Spurious emission
Adjacent channel power
Modulation Distortion
Microphone impedance
87.500 - 107.995MHz (WFM RX)
108.000 - 135.995MHz (AM RX)
136.000 - 173.995MHz (RX)
144.000 - 147.995MHz (TX)
335.000 - 479.995MHz (RX)
430.000 - 449.995MHz (TX)
87.500 - 107.995MHz (WFM)
144.000 - 145.995MHz (RX, TX)
430.000 - 439.995MHz (RX, TX)
16K0F3E (Wide mode) 8K50F3E (Narrow mode)
5, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100kHz
200
50Q unbalanced
13.8V DC±15% (11.7 to 15.8V)
Negative ground
0.6A (Max.) 0.4A (Squelched)
11.0A
- 10 to 60 C
±2.5ppm
142 (w) x 40 (h) x 174 (d) mm
(w/o knobs)
Approx. 1.0kg
High : 50W (VHF)
35 W(UHF)
Mid : 10W
Low : 5W
Variable reactance frequency modulation
±5kHz (Wide mode) ±2.5kHz (Narrow mode)
-60dB
-60dB
Lass than 3%
2kQ
2