Alinco DR-CS25 - FUNCTION MENU SETUP; SENDING 2-TONE CALL; SENDING 5-TONE CALL; SENDING DTMF CALL

16
7
Sending 5-Tone Call
3.
Press / to select the desired 5-TONE group, Press
[
PTT]
to transmit selected group.
4.
Total:100groups, 00-99, Default:00.
5.
Press any key except
PWR
,
P3
,
P4
, , key to exit.
5-TONE operation parameters must be edited by programming
software prior to the practical operation.
Sending 2-Tone Call
1.
Press and hold
FUNC
key for over 2 seconds to enter setting menu.
2.
Press
P3
/
P4
key to choose No.03 menu, LCD displays "
2TON
XX
", "
XX
" indicates the preprogrammed
groups.
3.
Press / to select the
desired 2-TONE group, Press PTT to
transmit selected group.
4.
Total:32groups, 00-31, Default: 00.
5.
Press any key except
PWR
,
P3
,
P4
, , key to exit.
2-TONE will be operation parameters must be edited by
programming software prior to the practical operation.
This function is to only query edited group or name.
1.
Press and hold
FUNC
key for over 2 seconds to enter setting menu.
2.
Press
P3
/
P4
key to choose No.04 menu,
LCD displays "
5TON XX
", "
XX
" indicates
the preprogrammed groups.
Sending DTMF call
1.
Press and hold
FUNC
key for over 2 seconds to enter setting menu.
2.
Press
P3
/
P4
key to choose No.05 menu, LCD displays "
DTMF
XX
", "
XX
" indicates the operation parameters must be.
3.
Press / to select the desired
DTMF group.
4.
Total:16groups, 01-16, Default:01.
5.
Press any key except
PWR
,
P3
,
P4
,
, key to exit.
FUNCTION MENU SETUP

"2TONE": The channel will be mute
by a 2-Tone signal. The speaker won’t
sound until receiving a correspondent
2-Tone signal. Hold [
PTT
] then press
[
UP
] to transmit the pre-stored 2-Tone
signal.

"5Tone": The channel will be mute by
a 5-Tone signal. The Speaker won’t
sound until receiving a correspondent 5-Tone signal. Hold [
PTT
]
then press [
UP
] directly to transmit the pre-stored 5-Tone signal.
4.
Press any key except
PWR
,
P3
,
P4
, , key to exit.