Alinco DR-CS25 - Microphone Operation; HIGH;MID;LOW POWER SELECTION; LCD BACKLIGHT; BEEP SOUND

25
8
Talk Around
Refer to P.19 for details.
1.
In standby, press , then press key, LCD displays "
TALK--
OF
".
2.
Press [ / ] to select the desired setting .
ON:Enable Talk Around
OFF:Disable Talk Around
3.
Press number key to conrm and exit.
BEEP sound
Refer to P.19 for details.
1.
In standby, press , then press , LCD displays "
BEEP--XX
”.
2.
Press [ / ] to turn on/off BEEP prompt.
BEEP—OF: turn off the beep;
BEEP—ON: turn on the beep.
3.
Press number key to conrm and exit.
HIGH/MID/LOW Power Selection
1.
In standby, press , then press , LCD displays "
POW-XX
".
2.
Press [ / ] to select the desired power.
3.
In corresponding icon, press [ / ] to select the desired
CTCSS/DCS encode and decode.
4.
Press , , or to conrm and exit.
HI:High Power
MI:Middle Power
LOW:Low Power
3.
Press number key to conrm and exit.
LCD Backlight
1.
In standby status, press , then press LCD displays "
COL-
XX
" .
2.
Press [ / ] to select desired backlight.
ORG:Orange
SAK: Sakura (Blight Pink)
WHI:Whilt
OFF:No backlight
3.
Press number key to conrm and exit.
Microphone Operation