NetworkOnCard Mode of Operation 25
3.2.2 NetworkOnCard: Data Transfer Using Special Cards
For parameterization of the NetworkOnCard readers, you can use special cards onto which you can write
data from the IF-60x0 system. To program the NoC readers, proceed as described in the device
documentation.
Overview of NetworkOnCard system components:
The IF-60x0 system writes information onto special cards for NetworkOnCard readers. With such cards,
NetworkOnCard readers are supplied with information on, for example, the type of booking credentials
permitted and the times at which bookings may be performed.
Furthermore, the IF-60x0 system reads the bookings and/or events out from the NetworkOnCard readers
using upload cards and stores this data in the IF-60x0 system.
Persons carry their booking permissions with them on their credentials. Depending on the application,
booking permissions can be written onto a credential at a central location or can be transferred to a
credential by means of an online terminal on a daily basis.
NetworkOnCard Reader: Cards for Data Exchange with IF-60x0
Information for NetworkOnCard readers is transferred using special credentials.
Data Stored on Information / Function
Basic initialization of the
NetworkOnCard reader
Facility card Security function for authenticating
the NetworkOnCard reader
Door initialization
Door initialization card (1) Contains all the important door
information such as door release
time, door group, NetworkOnCard
time model
Date/time of the
NetworkOnCard reader
Time initialization card Sets the internal time of a
NetworkOnCard reader
NetworkOnCard time
profiles
Card with NetworkOnCard time
profile
Includes a NetworkOnCard time
profile, the date and the time to
one or more NetworkOnCard
readers.
To Next Page
Loading...
Need help?
General
