30 NetworkOnCard Mode of Operation
Signaling for a credential that only has the permanently open function:
Long RED
Booking memory entry: Toggle closed
In the case of credentials that are equipped only with the permanently open function, the
activation/deactivation occurs immediately after the door fitting has read the credential.
3.5.3 Automatically blocking/unblocking a door
With time models, you can program the door to automatically toggle to permanently open mode at a
specific time on defined days of the week and to toggle back to the standard mode at another time. You
can also configure the NetworkOnCard in such a way that the door does not switch to permanently open
mode automatically, but that a manually activated permanent opening ends automatically.
Access authorizations based on place and time
You can also use time models to restrict the access authorizations of persons by defining the access
points (NetworkOnCard devices) and the time (day of the week and time).
Overview: Connection between bookings/time models and the door status
To Next Page
Loading...
Need help?
General
