Rockwell Automation Publication 6181X-UM001C-EN-P - July 2015 3
Summary of Changes
This manual contains new and updated information. Changes throughout this
revision are marked by change bars, as shown to the right of this paragraph.
New and Updated
Information
This table contains the changes made to this revision.
Topic Page
Added ‘Preface Objectives’ section, and removed ‘Intended Audience’ and ‘Manual Conventions’ sections
9
Added ‘Abbreviations’ section 10
Added information in ‘Operating Systems’ section
12
Added link to Rockwell Automation Product Compatibility and Download Center (PCDC) website
12
, 53, 61
Removed ‘Multilingual User-interface CD Pack’ section
12
Added information in ‘Computer Options’ section
12
Revised information in ‘Parts List’ section 13
Revised nameplate artwork in ‘Computer Information’ section 13
Revised table information in ‘Hardware Features’ section 14
Added ‘Environment and Enclosure Information’ table 16
Added table information and footnotes in ‘Hazardous Locations’ section 17
Updated table information in ‘Control Drawing for USB Peripheral Devices’ section 19
Revised title and added information to ‘Computer Dimensions’ section 23
Added information in ‘Install the Computer’ section 24
Added information and art in ‘Connect Peripherals’ section 27
Added information and updated graphic in ‘Connect Power’ section 28
Moved ‘Operator Access’ section into ‘Operating Guidelines’ section 31
Revised and added information in ‘Start the Computer’ section 32
Replaced ‘reset’ with ‘restart’ and added information in ‘Restart the Computer’ section 33
Added ‘Shut Down the Computer’ and ‘Adjust the Display Brightness’ sections 33
Added ‘Pre-configuration’ section
36
Added ‘Post-configuration’ section
37
Separated existing information into new ‘Remove the Cover’ and ‘Reinstall the Cover’ sections
37, 38
Revised and added information in ‘CompactFlash Card’ section
39
Added information in ‘Replace or Add Memory Modules’ section
44
Added ‘Replace the RTC Battery’ section
45
Changed ‘Hardware Diagnostics’ title to ‘Hardware Monitoring’
47
Revised and added information in ‘Hardware Monitoring’ section
47
Revised and added information in ‘Troubleshooting’ section
48
Revised and added information in ‘Troubleshooting Checklists’ section
48
Added ‘Load the System Defaults’ section
51
Added information in ‘Clear the CMOS’ section
51
Added ‘Ship or Transport the Computer’ section
52
Added ‘Dispose of the Computer’ section
52
Added ‘Chapter Objectives’ section 53
Added information in ‘Driver Software’ section 53
Added return information in ‘RTC Battery’ section 56
Revised information in ‘Upgrade the BIOS from a CD Drive’ section 61
Revised information in ‘Upgrade the BIOS from an External Floppy Disk Drive’ section 63
To Next Page
Loading...
Need help?
General