Rockwell Automation Publication 6181X-UM001C-EN-P - July 2015 35
Chapter 4
Component Replacement
Chapter Objectives
This chapter provides information on the following topics:
• Accessories and Replacement Parts
• Voltag e Precautions
• Electrostatic Discharge Precautions
• Pre-configuration
• Post-configuration
• Required Tools
• Remove the Cover
• Reinstall the Cover
• CompactFlash Card
• Install an Add-in Card
• Replace or Add Memory Modules
Accessories and Replacement
Parts
You can view a list of accessories and replacement parts at the following Rockwell
Automation website: http://ab.rockwellautomation.com/Computers
.
Review the specifications of a new component before you install it to verify that
it is compatible with the computer. Record the model and serial number, and any
other pertinent information of new components for future reference.
Voltage Precautions
The computers contain line voltages. Disconnect all power to the computer
before you install or remove components.
We recommend that you use only Allen-Bradley approved accessories and
replacement parts.
SHOCK HAZARD: Disconnect all power to the computer before you remove
components.
Failure to disconnect power can result in severe electrical shock to an individual or
electrostatic discharge (ESD) damage to the computer and components.
To Next Page
Loading...
Need help?
General