162 Rockwell Automation Publication 2080-UM002G-EN-E - March 2015
Appendix A Specifications
Inputs
Attribute 120V AC Input
(2080-LC30-16AWB only)
High-Speed DC Input
(2080-LC30-16QVB and
2080-LC30-16QWB only)
(Inputs 0…3)
Standard DC Input
(2080-LC30-16QVB and
2080-LC30-16QWB only)
(Inputs 4…9)
Number of Inputs 10 4 6
Input group to backplane
isolation
Verified by the following dielectric
tests: 1,400V AC for 2 s
132V working voltage (IEC Class 2
reinforced insulation)
Verified by the following dielectric tests: 1,414V DC for 2 s
75V DC working voltage (IEC Class 2 reinforced insulation)
Voltage category 110V AC 24V DC sink/source
On-state voltage range 79…132V AC
47…63 Hz
16.8…26.4V DC 10…26.4V DC
Off-state voltage, max 20V AC 5V DC
Off-state current, max 1.5 mA
On-state current, min 5 mA @ 79V AC 5.0 mA @ 16.8V DC 1.8 mA @ 10V DC
On-state current, nom 12 mA @ 120V AC 7.66 mA @ 24V 6.15 mA @ 24V
On-state current, max 16 mA @ 132V AC 12.0 mA @ 30V DC
Nominal impedance 12 kΩ @ 50 Hz
10 kΩ @ 60 Hz
3 kΩ 3.74 kΩ
Inrush current, max 250 mA @ 120V AC —
Turn on time/
Turn off time, max
(without filtering)
ON: 1 ms
OFF: 8 ms
ON: 3.2 μs
OFF: 0.6 μs
ON: 33 μs…0.1 ms
OFF: 22 μs…0.02 ms
IEC input compatibility Type 3
AC input filter setting 8 ms for all embedded inputs
(In Connected Components Workbench, go to the Embedded I/O configuration window to reconfigure the filter setting for
each input group)
Isolated AC Inputs (2080-LC30-16QWB, 2080-LC30-16QVB) (Inputs 0…3)
Attribute Value
On-state voltage, nom 12/24V AC @ 50/60 Hz
Off-state voltage, min 4V AC @ 50/60 Hz
Operating frequency, nom 50/60 Hz
Outputs
Attribute Relay Output
(2080-LC30-16AWB, 2080-LC30-16QWB only)
Hi-Speed Output
(2080-LC30-16QVB only)
(Outputs 0…1)
Standard Output
(2080-LC30-16QVB only)
(Outputs 2…5)
Number of outputs 6 2 4
Output voltage, min 5V DC, 5V AC 10.8V DC 10V DC
Output voltage, max 125V DC, 265V AC 26.4V DC 26.4V DC
Load current, min 10 mA 10 mA 10 mA
To Next Page
Loading...
Need help?
General
