16 MicroLogix 1200 Analog Output Module
Publication 1762-IN016B-EN-P - December 2005
Type/Range Select (Bits 11 through 8)
These bits indicate the type and range as in the following table. Other combinations
of these bits are not supported and result in an error.
Configuration via RSLogix 500
The module can be configured using RSLogix 500 programming software, as shown
below.
Bit Settings Data Format
11 10 9 8
0000Voltage Mode 0 to 10V dc
0011Current Mode 4 to 20 mA
other Not Supported
To Next Page
Loading...
