Access Procedures 3-37
Removing the Fan Inverters
Removal
1. Remove power from the drive (Removing Power from the Drive on
page 3-3).
2. Remove the covers from the power structures. Refer to Removing the
Covers from the Power Structures on page 3-15.
3. Remove the power structures from the drive cabinet (Removing the
Power Structures from the Drive Enclosure on page 3-25).
4. Prepare Power Structure 1 for Inverter Assembly Removal.
Task Description
Remove the cable-ties that secure the cables with orange insulation
(on both left-hand and right-hand sides). This will allow you to move the
cables while removing the inverter assemblies.
A
Left-hand
Side
View
Left-hand
Inverter
Front View
on Left-hand Side
A
A
A
Right-hand
Inverter
To Next Page
Loading...
