Rockwell Automation Publication 750-PM001N-EN-P - February 2017 229
Chapter 5
Embedded Feature and Option Module
Parameters
This chapter lists and describes the PowerFlex 750-Series drive embedded feature
and option module parameters. The parameters can be programmed (viewed/
edited) using a Human Interface Module (HIM). Refer to Enhanced PowerFlex
7-Class Human Interface Module (HIM) User Manual, publication 20HIM-
UM001, for information on using the HIM to view and edit parameters. As an
alternative, programming can also be performed using DriveTools™ software and a
personal computer.
Topic Page
Embedded EtherNet/IP (Port 13) Parameters 230
Communication Configurations 236
Embedded DeviceLogix (Port 14) Parameters 239
11-Series I/O Module Parameters 242
22-Series I/O Module Parameters 252
Single Incremental Encoder Module Parameters 263
Dual Incremental Encoder Module Parameters 266
Universal Feedback Module Parameters 271
Safe Speed Monitor Module Parameters 289
To Next Page
Loading...
