Allen-Bradley PowerFlex 755 Reference Manual

CIP Axis Attributes
Chapter 4
Rockwell Automation Publication MOTION-RM003I-EN-P - February 2018 235
The Converter Rated Output Power attribute is the drive converter output power
rating. This value is determined by the motion axis from the associated converter.
See also
Drive Output Attributes on page 251
Power and Thermal Management Configuration Attributes on page 252
These are the attributes that provide useful statistics on motion axis operation.
Control Power-up Time
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG REAL - - - Seconds
Elapsed time since axis control power was last applied.
Cumulative Run Time
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG REAL - - - Hours
Accumulated time that the axis has been powering the Running state.
Cumulative Energy Usage
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG REAL - - - Kilowatt Hours
Accumulated output energy of the axis.
Cumulative Motor Rev
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - D MSG LINT - - -
Cumulative number of times motor shaft has turned. (Rotary Motors Only).
Cumulative Main Power Cycles
Usage Access T Data
Type
Default Min Max Semantics of value
Optional - BD MSG DINT - - -
Axis Statistical Attributes

Allen-Bradley PowerFlex 755 Specifications

General

Category	AC Drive
Amperage	2.2…1470 A
Output Voltage	0 to Input Voltage
Output Current	2.2…1470 A
Enclosure	IP20, IP30, IP54
Communications	EtherNet/IP, ControlNet, DeviceNet
I/O	Digital, Analog, Encoder, Relay
Safety	Safe Speed Monitor
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overload, Short Circuit, Ground Fault, Overtemperature
Operating Temperature	-10°C to 50°C (14°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Humidity	5…95% noncondensing
Altitude	Up to 1000m (3300ft) without derating
Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Input Voltage	200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Control Method	Sensorless Vector