EasyManuals Logo

Allen-Bradley PowerFlex User Manual

Allen-Bradley PowerFlex
235 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #82 background imageLoading...
Page #82 background image
2-60 Digital Inputs
The table below defines which pairs of input functions are in conflict.
Combinations marked with a “ ” will cause an alarm.
Important:There are combinations of input functions in
Table 2.L that
will produce other digital input configuration alarms. “DigIn
CflctA” alarm will also be produced if “Start” is configured and
“Stop – Clear Faults” is not.
Table 2.L Input function combinations that produce DigIn CctA alarm
“DigIn CflctB” indicates a digital Start input has been configured without a
Stop input or other functions are in conflict. Combinations that conflict are
marked with a “ ” and will cause an alarm.
Table 2.M Input function combinations that produce DigIn CctB alarm
“Digin CflctC” indicates that more than one physical input has been
configured to the same input function, and this kind of multiple
configuration isn’t allowed for that function. Multiple configuration is
allowed for some input functions and not allowed for others.
There is one additional alarm that is related to digital inputs: the “Bipolar
Cflct” alarm occurs when there is a conflict between determining motor
direction using digital inputs on the terminal block and determining it by the
polarity of an analog speed reference signal.
Note that the drive will assert an alarm when the user sets up a illegal
configuration rather than refusing the first parameter value that results in
such a configuration. This is necessary because the user may have to change
several parameters one at a time in order to get to a new desired
configuration, and some of the intermediate configurations may actually be
illegal. Using this scheme, the user or a network device can send parameter
updates in any order when setting up the digital input configuration.
Acc2/Dec2 Accel 2 Decel 2 Jog Jog Fwd Jog Rev Fwd/Rev
Acc2 / Dec2
Accel 2
Decel 2
Jog
Jog Fwd
Jog Rev
Fwd / Rev
Start StopCF Run Run Fwd Run Rev Jog Jog Fwd Jog Rev
Fwd/
Rev
Start
StopCF
Run
Run Fwd
Run Rev
Jog
Jog Fwd
Jog Rev
Fwd / Rev

Table of Contents

Other manuals for Allen-Bradley PowerFlex

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley PowerFlex and is the answer not in the manual?

Allen-Bradley PowerFlex Specifications

General IconGeneral
CategoryDC Drives
ManufacturerAllen-Bradley
SeriesPowerFlex
Communication OptionsEtherNet/IP, DeviceNet, ControlNet
Protection FeaturesOvercurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Enclosure TypeNEMA 1, NEMA 12, NEMA 4/4X
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Humidity5% to 95% (non-condensing)
AltitudeUp to 1000m (3280 ft) without derating

Related product manuals