Installation Instructions
Original Instructions
Stratix 8000 and 8300 Ethernet Managed Switches
Catalog Numbers 1783-MS06T, 1783-MS10T, 1783-RMS06T, 1783-RMS10T, 1783-MX08T, 1783-MX08F, 1783-MX04S, 1783-MX08S,
1783-MX04E, 1783-MX04T04E
Topic Page
Parts List 5
Required Tools 6
Site Requirements 6
Attach Expansion Modules 6
Mount the Switch 8
Ground the Switch 9
Wire the Power Source for the Switch 10
Install the Power and Relay Connector on the Switch 12
Wire the Power Source for the PoE Expansion Module 13
Install the Power Connector on the PoE Expansion Module 13
Install an SFP Module 14
Install the CompactFlash Card 14
Connect to 10/100 Copper Ports 15
Connect to PoE Expansion Module Ports 15
Connect to Dual-purpose Uplink Ports 15
Connect to SFP Fiber Ports 16
Connect to 100BaseFX Ports 16
Remove Power from an Expansion Module with PoE 16
Specifications 17
Additional Resources 20
To Next Page
Need help?
General
