AT-GS900MX Series Installation Guide for VCStack
31
SFP Slots
The switches have two SFP slots that support the following types of SFP
1000Mbps transceivers:
1000Base-SX/LX SFP transceivers
Single-port BiDi 1000Base-LX SFP transceivers
1000Base-ZX SFP transceivers
You may use the transceivers to connect switches to other network
devices over large distances, build high-speed backbone networks
between network devices, or connect high-speed devices, such as
servers, to your network.
The switches support a variety of short and long distance SFP modules.
For a list of supported SFP modules, contact your Allied Telesis
representative or visit our web site.
The SFP slots and two twisted pair ports are paired together to form
combo port pairs. For information, refer to “Combo Twisted Pair
Ports and SFP Slots” on page 32.
To Next Page
Loading...
