AT-GS900MX Series Installation Guide for VCStack
65
Unpacking the Switch
All switches, except the AT-GS924MX Switch, come with the components
listed in Figure 21. If any item is missing or damaged, contact your Allied
Telesis sales representative for assistance.
Figure 21. Components of the Switches
The AT-GS924MX Switch comes with the components shown in Figure 22
on page 66.
Two wall or equipment rack mounting brackets
One 2 m (6.6 ft) local management cable with
RJ-45 (8P8C) and DB-9 (D-sub 9-pin)
connectors.
Eight bracket screws
One regional AC power cord
Two anchors for concrete walls:
Length: 29.6 mm (1 1/8 in.)
Diameter: 6.0 mm (0.25 in)
Two screws for wood or concrete walls:
Length: 31 mm (1 1/4 in.)
Width: 4.3 mm (1/8 in.)
Power cord retaining clip
To Next Page
Loading...
