Allworx 9224 - Chapter 1 Introduction; Who Should Read this Guide; Guide Organization

Allworx Phone Model 9224 User Guide
+1 866 ALLWORX * +1 585 421 3850 Page 1
www.allworx.com
Version: L Revised: October 11, 2018
Chapter 1 Introduction
The Allworx 9224 IP phone consists of a backlit graphic LCD screen, four soft keys, ten function
buttons, and 24 programmable function keys (PFKs) for users to manage phone calls.
Unpack the Allworx phone and applicable accessories, identify each item in the checklist and inspect
for missing items.
• Allworx phone and base: attach the base to the back of the phone. See “Adjust the Phone
Angle” on page 4 for more information.
• Handset with cord: attach the cord to the jack on the back of the Allworx phone.
• Phone Functions Reference Card: slide the quick operating guide between the base and back
of phone.
Additional equipment needed not included in the box:
• Ethernet Cable: connects the phone to the network
• Power Supply: provides power to the Allworx phone - rated 24VDC, 400 mA (or a network
connection with Power over Ethernet).
1.1 Who Should Read this Guide
This guide is for users of the Allworx 9224 IP phone.
1.2 Guide Organization
This User Guide describes the operation, features, and configuration options.
Chapter 1 - information about this guide.
Chapter 2 - set up of the IP phone.
Chapter 3 - managing calls.
Chapter 4 - IP phone features.
Chapter 5 - IP phone advanced options.
Chapter 6 - regulatory notices.
Chapter 7 - abbreviations used in this guide.