Allworx Phone Model 9224 User Guide
Page 20 +1 866 ALLWORX * +1 585 421 3850
www.allworx.com
Version: L Revised: October 11, 2018
• Unattended (Blind) Transfer: skip to step 2.
• Attended (Announced) Transfer: Talk to the recipient.
2. Hang up, press the TRANSFER button, or press the XFER softkey to complete the transfer.
To do a two-step transfer:
For use if a PFK is unavailable for the intended recipient:
1. Press the TRANSFER button.
To transfer a call to an external party while in Key System mode, press a free Line Appearance
PFK and then dial the phone number.
If the system is not in Key System mode, continue to step 2.
2. Wait for the dial tone, and then dial the extension to transfer the call.
• Unattended (Blind) Transfer: skip to step 3.
• Attended (Announced) Transfer only: Talk to the recipient.
3. Hang up, press the TRANSFER button, or press the XFER soft key.
To transfer to voicemail:
1. Press the TRANSFER button, and then press the VMAIL soft key.
2. Dial the extension, press a BLF, Contact, or Personal Speed Dial key.
3. Hang up, press the TRANSFER button, or press the XFER softkey.
4.14 Conference
The 9224 IP phone provides the ability to set up conferences between three parties (3-way
conferences). The PFK flashes green while making conference call connections and is solid green
during the conference call
The phone configuration may not enable users to stay on the line to announce the transfer. See
“To do an Unannounced (Blind) transfer :” on page 19. for Announced transfers.
The phone configuration may not enable users to stay on the line to announce the transfer. See
“To do an Unannounced (Blind) transfer :” on page 19. for Announced transfers.
If using the Call Assistant recording feature, the PFKs flash red and green.
To Next Page
Loading...
