Allworx Phone Model 9224 User Guide
+1 866 ALLWORX * +1 585 421 3850 Page 23
www.allworx.com
Version: L Revised: October 11, 2018
Chapter 5 Features
The 9224 IP phone has many features to easily manage day-to-day activities using the function
buttons, soft keys, or PFKs.
5.1 Contacts
User, System, and Public Contacts are available to dial on the Allworx 9224 phone.
• User and System contacts – phones with an internal Allworx extension assigned.
• Public Contacts – number available to all Allworx users.
If there are more one or more Contact PFKs available, pressing the Contact PFK immediately dials or
transfers a call to the extension or phone number assigned to the contact.
5.2 Busy Lamp Field (BLF)
The BLF PFK monitors the status of a specific phone assigned to another Allworx user. The Allworx User
can press the PFK to dial or transfer a call to the extension automatically.
5.3 System Extensions
Dial the digits in the table below for a system extension. Check the phone functions tab of the My
Allworx Manager page or contact the Allworx Server Administrator for the actual dialed digits.
BLF PFK State
Solid Red User is on the phone.
Flashing Red User has an incoming call.
Number Access
0 Initiate a call to the company operator.
3 + extension Connect to another user’s voicemail and leave a message.
402 Connect to an Overhead Paging System to make an announcement.
403 Activate the door relay, if connected and configured.
404 Access to the Audio Message Center.
408 Access the Conference Center. To set up a new conference, use My Allworx Manager.
4301 to 4332 Connect to an Auto Attendant - *400 is the default Auto Attendant. The number of Auto Atten-
dants is dependent upon the Allworx server.
To Next Page
Loading...
