Allworx 9224 - 4.3 Place a Call; 4.4 Receive a Call

Allworx Phone Model 9224 User Guide
Page 14 +1 866 ALLWORX * +1 585 421 3850
www.allworx.com
Version: L Revised: October 11, 2018
4.3 Place a Call
To place an outbound call, do one of the following:
• Lift the handset or press the SPEAKER function button, and then dial the extension or phone
number.
• Dial the extension or phone number to automatically activate the speaker phone or headset.
• BLF PFK: automatically dials the assigned programmed phone.
• Contact PFK: automatically dials the Allworx User, System, or Public number programmed by
the Allworx Server Administrator. For more information about Contacts, see “Contacts” on
page 23 for more information.
• Shared Call Appearance PFK: place extension-to-extension calls or obtain an outside line
(must dial 9
1
first). If the PFK LED is solid red, the line is in use “remotely” on another assigned
handset of the same Shared Call Appearance.
• Line Appearance PFK: automatically obtains an outside line appearance.
4.4 Receive a Call
The following programmable button LEDs indicate an incoming call:
To manage the incoming call:
Do one of the following:
• Lift the handset, press the Headset PFK or the Speaker phone function button.
• Press the flashing PFK.
• Press the IGNORE soft key to stop the audible ringing and the PFK continues to flash until the
user answers the call or the caller hangs up.
• Press the SILENT soft key to stop the audible ringing, the phone screen displays the incoming
call information, and the PFK continues to flash until the user answers the call or the caller hangs
up.
• Call Appearance • Shared Call Appearance • Call Queue
• Line Appearance
• Ring Group
1
• Appearance
1
Calls to a single extension route to and ring multiple phones where calls are answered in the first in, first out order.