19
Subject to change without notice | 83030100dUK | ait-deutschland GmbH
9.2.12 Function page “Ventilation”
1 Symbol of the programme area
2 to the settings page “Ventilation”
3 Symbol of the programme area and mode of
operation that is set
Current fan level
The symbol of the programme area (①) is displayed
depending on the currently active fan level.
Fan off
Humidity control (Fan level 1)
Reduced operation (Fan level 2)
Nominal ventilation / Party (Fan level 3)
Intensive ventilation (Fan level 4)
Changing the mode of operation
“9.1.3 Making settings”, page 11, variant 2
Settings page “Ventilation”
1 Duration of ventilation in maximum mode
(= Intensive ventilation with the highest possible
air exchange)
► ⇒ Scroll and save changes.
After this time has expired control takes place
according to the set mode of operation.
To Next Page
Loading...
