Alpine CDA-137EBT User Manual

Bit rate
This is the “sound” compression rate specied for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the les.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so
the sound is sampled (recorded) 44,100 times per second. The higher
the sampling rate, the higher the sound quality, but also the larger the
volume of data.
Encoding
Converting music CDs, WAVE (AIFF) les, and other sound les into the
specied audio compression format.
Tag
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA les.
Root folder
The root folder (or root directory) is found at the top of the le system.
The root folder contains all folders and les. It is created automatically for
all burned discs.
Terminology
Adjusting Subwoofer Level/Balance
(Between Left and Right)/Fader (Between
Front and Rear)/Auto Volume/Black Out/
Defeat
1
Press AUDIO repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBWOOFER
*1
d
BALANCE
d
FADER
d
BLACK OUT
*2
d
DEFEAT
d
VOLUME
d
SUBWOOFER
*1
*2
When the Subwoofer mode is set to OFF, its level cannot be
adjusted, refer to "Turning Subwoofer ON/OFF" on page 13.
When BLACK OUT mode is turned ON, aer 5 seconds, all display
indications on this unit will turn o to reduce power consumption.
is additional power enhances the sound quality. .
Sound Setting
•
•
•
If no operation is performed for 5 seconds aer selecting the
SUBWOOFER BALANCE, FADER, BLACK OUT or DEFEAT mode,
the unit automatically returns to normal mode.
Depending on the connected devices, some functions and display
indications do not work.
If any button on the unit is pressed during the BLACK OUT Mode,
the function is displayed for 5 seconds before returning to Blackout
mode.
Subwoofer Level 0 ~ 15
Balance –15(L) ~ 15(R)
Fader –15(R) ~ 15(F)
Black Out ON/OFF
Defeat ON/OFF
ON/OFF 0 ~ 35
Note
Note
2
Turn the Rotary encoder until the desired sound is obtained
in each mode.
12
-EN
MX
Preset buttons
(1 through 6)


SOURCE/
BAND
Rotary encoder
/ENTER

AUDIO/SOUND SETUP

Alpine CDA-137EBT Specifications

General

Brand	Alpine
Model	CDA-137EBT
Category	Car Receiver
Language	English