Alpine CDA-137EBT User Manual

Note
Note
Note
•
•
•
•
•
Depending on the mobile phone, this operation may not be performed.
Set “Audio” to ON when you want to use Bluetooth Audio function. Refer
to “Setting the BLUETOOTH Connection (Bluetooth IN)” on page 22.
In the USB mode, when this unit is reset, ACC is switched from OFF to
ON, or when the USB is connected to this unit, “Banking” is displayed for
several seconds.
During a call, sound on the BLUETOOTH audio source is muted.
If you operate the Hands-free phone (e.g. searching in the phonebook)
while using the Bluetooth Audio function, BLUETOOTH Audio playback
may be aected.
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
Audio information of a BLUETOOTH compatible mobile phone, a
portable player, etc., is controllable/playable wirelessly
*
from this unit.
Call Switching Operation
While calling, press BAND to switch the call sound between
the unit and mobile phone.
BLUETOOTH Audio Operation
*
To play back audio, a mobile phone or a portable player conforming
to A2DP (Advanced Audio Distribution Prole) and AVRCP (Audio/
Video Remote Control Prole) is required. Not all functions work with all
devices.
Recalling the Bluetooth Audio Mode
Press SOURCE/
C
to select the Bluetooth Audio mode.
Selecting the desired Song
Pausing
Press
w
.
Return the beginning of the song being played back.
Press
q
.
A playback stops. Touching again will resume a playback.
Press
e
.
Forward the next song.
Pressing and holding
w
or
e
will fast backward/fast forward
track continuously.
USB Memory (optional)
Connecting the USB Memory (optional)
Using the USB Memory Banking Function
If a USB Memory device is connected to the unit, MP3/WMA/AAC les
can be played back.
1
2
What is a Bank?
A bank is a unit of up to 1,000 songs, which is stored in memory.
“Banking” refers to the grouping of songs available in USB Memory,
in banks of 1,000 songs each. However, when a USB Memory is
connected, 1BANK can store up to 1,000 songs under the following
conditions. Otherwise, the number of songs that can be stored may
be less than 1,000.
Conditions (general estimate values)
Playlists: 20 (32 characters; 64 bytes)
Genres: 10 (32 characters; 64 bytes)
Composers: 30 (32 characters; 64 bytes)
Artists: 30 (32 characters; 64 bytes)
Albums: 100 (32 characters; 64 bytes)
Titles: 1,000 (32 characters; 64 bytes)
Folders: 100 (32 characters; 64 bytes)
Files: 1,000 (32 characters; 64 bytes)
File Paths: 1,000 (128 characters; 256 bytes)
About Banking
While a bank is being built up, “Banking” is displayed. Banking
occurs whenever a USB Memory device is connected or aer power
to the head unit turns on. It can take anywhere from a few seconds
to up to several minutes for banking to complete. is depends on
the number of les and folders in USB Memory.
Available operations while Banking
•
•
•
•
During Banking, the information display changes so the VIEW
operation is not available.
With a song playing, Regular fast-forwarding and next song selection
is available.
While Banking, the song playback order may dier from the song
order in the USB Memory device.
Searching is not recommended during the Banking process as the
database is under construction at this time, and malfunction may
result in some cases.
27
-EN
VIEW
Preset buttons
(1 through 6)


SOURCE/
/ II
ABC SKIP
Rotary encoder
/ENTER


1
2

4 5

Alpine CDA-137EBT Specifications

General

Brand	Alpine
Model	CDA-137EBT
Category	Car Receiver
Language	English