Alpine CDA-137EBT User Manual

BT Hands Free Calling
Setup Before Using
BLUETOOTH SETUP
BLUETOOTH is a wireless technology allowing communication between
a mobile device or personal computer over short distances. is enables a
hands-free call or data transmission between BLUETOOTH compatible
devices. BLUETOOTH transmission is available in the unlicensed 2.4
GHz spectrum if the distance between devices is within 10 meters. For
details, refer to the BLUETOOTH Home page (http://www.bluetooth.
com).
e following steps 1 to 5 are common to the various BLUETOOTH
functions. For details, refer to each individual function
Before using the BLUETOOTH function, the following settings need to
be made.
About BLUETOOTH
Before Using BLUETOOTH Function
Note
Note
Note
Note
•
•
•
•
•
•
•
•
•
•
•
•
Depending on the BLUETOOTH version, a BLUETOOTH compatible
device may not be able to communicate with this unit.
e Passcode is xed as "0000".
If the connection is unsuccessful, “Failed” is displayed.
Set "HFP" or "Audio" to ON, and then perform BLUETOOTH SETUP
operation. Refer to "Setting the BLUETOOTH Connection (Bluetooth
IN)" on page 22.
Aer a successful pairing, the two devices should re-pair automatically
whenever the vehicle's ignition is turned ON. However, the re-pairing
may fail. If the auto re-pairing fails, try to pair manually.
Set "Visible Mode" to ON to enable this unit to be recognised by a
BLUETOOTH compatible device, refer to "Setting the Visible Mode" on
page 22.
You can also manually pair the BLUETOOTH devices from this unit. For
details, refer to "Pairing a BLUETOOTH Device from the unit" on page
22.
Proper function of this unit with all BLUETOOTH compatible devices is
not guaranteed. For handling of the BT compatible device, consult your
ALPINE dealer or ALPINE website.
Depending on the surroundings, BLUETOOTH wireless connection may
be unstable.
When you place a call, or perform setup operations, be sure to stop your
car in a safe place.
Depending on the connected BLUETOOTH compatible device(s), the
function may dier. Also refer to the Owner's Manual of the connected
device(s).
When you search for this unit using the BLUETOOTH compatible phone,
the unit name is displayed as "Alpine CD Receiver".
Set "HFP" or "Audio" to ON when you want to use Hands-
Free phone or Bluetooth Audio function. Refer to "Setting
the BLUETOOTH Connection (BT IN)" on page 22.
For details on the control from a BLUETOOTH compatible device, refer
to the Owner's Manual of the BLUETOOTH compatible device.
How to connect to a BLUETOOTH
compatible device (Pairing)
Pairing a BLUETOOTH compatible device with
SSP (Secure Simple Pairing)
Pairing a BLUETOOTH compatible device without
SSP (Secure Simple Pairing)
1
1
1
3
3
2
2
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
Press and hold SETUP for at least 2 seconds to activate the
SETUP mode.
Using your BLUETOOTH compatible device, select the
"Alpine CD Receiver" for pairing.
If the pairing was successful, "Connected" is displayed for a
few seconds. The head unit then returns to its previous state.
If the pairing was successful, “Connected” is displayed for a
few seconds. The head unit then returns to its previous state.
Turn the Rotary encoder to change the head unit display
from "Pairing NO" to "Pairing YES", and then press
s
/ENTER.
If "Pairing NO" is selected, the connection will be cancelled.
Input the Passcode ("0000") in a BLUETOOTH compatible
device.
Note
•
Before using BLUETOOTH function, it must be paired with this unit.
Refer to "How to connect to a BLUETOOTH compatible device (Pairing)"
on page 21.
2
Turn the Rotary encoder to select “Bluetooth", and then
press
s
/ENTER.
The BLUETOOTH setup mode is activated.
21
-EN
VIEW
SETUP
 
Preset buttons
(1 through 6)


SOURCE/
/ II
ABC SKIP/BAND
Rotary encoder
/ENTER

1 2

Alpine CDA-137EBT Specifications

General

Brand	Alpine
Model	CDA-137EBT
Category	Car Receiver
Language	English