1
2
Turn the Rotary encoder to select the outgoing mode.
Setting contents:
Voice Dial / Dialed Call / Received Call / Missed Call / Phone
Book
Voice Dial:
Voice dial operation
Dialed Call:
Dialed history
Received Call:
Received history
Missed Call:
Missed incoming history
Phone Book:
Mobile phone book
Calling
Note
Note
•
•
•
•
•
•
•
*
e order of the list display depends on the setting of "PB Order" (refer to
"Changing the Phone book List Order" on page 23).
If the call history or phone book of the mobile phone is added or deleted
while it is connected to the unit, the list displayed on the unit may not be
brought up to date. If it is not updated, you cannot correctly place a call.
You can display the information of a number stored in phone book by
pressing
VIEW
.
If the information can not be obtained, “NO Name” or “NO Number”
will be displayed.
You can perform this operation only when a voice dial compatible mobile
phone is connected. If the mobile phone is not compatible with the voice
dial, "No Support" is displayed for 2 seconds
e Voice Dial function performance depends on the recognition range of
the mobile phone and mounting location of the microphone. Please pay
attention when the microphone is mounted.
Voice dial operation depends on the function of the mobile phone. For
details, refer to the Owner’s Manual of the mobile phone.
If a called person that you say is not found, “No Call” is displayed for 2
seconds.
is message depends on the voice tag prestored in the mobile phone.
Call History is recorded for the last dialed/received/missed calls (80
records for each). ere are various ways of making calls based on the
“Calling”. e following steps 1 to 5 are common to the various ways
of making these calls. For details, refer to each individual category for
making calls.
Press .
The outgoing method list is displayed.
When the Voice Dial mode is activated "Speak" is displayed.
Say the telephone number*, name* you want to call into the
microphone.
You can make a call using voice commands.
Previously dialed telephone numbers are stored in dialed calls history.
You can redial a number by searching from dialed calls history.
Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
Up to 1,000 names (at most 5 telephone numbers for each name) are
downloadable from a mobile phone. Dial a call by selecting a person
from the phone book list.
Voice Dial Operation
Redialing a Number In Outgoing History
Dialing a Number In Incoming History
Dialing a Number In Incoming Missed Call History
Dialing a Number In The Phone Book
Setting item:
Voice Dial
Setting item:
Dialed Call
Setting item:
Received Call
Setting item:
Missed Call
Setting item:
Phone Book
e
e
e
e
e
Note
Note
Note
•
•
*
•
•
•
Press
c
to return to the previous mode.
It may take some time for the list to be displayed, and also directly
aer connection, the list may not be brought up to date.
If the name cannot be recognised, "NO Name" will be displayed.
You can use Phone book alphabet search function to search a name or
number from Phone Book. For details, refer to "Phone book Alphabet
Search Function" on page 26.
If no operation is performed for 60 seconds, the unit will return to normal
mode automatically.
e names registered in the telephone book are displayed. If the name is
not registered, a number is displayed. If both name and number cannot
be displayed, “NO Name,NO Number” will be displayed.
3
5
4
Press
s
/ENTER.
The outgoing mode is activated, and each mode list is displayed.
Press
s
/ENTER.
The selected telephone number will be called. If one name has
several numbers registered in the telephone book, press
s
/ENTER after selecting the name*, then turn the
Rotary encoder to choose the desired number and press
s
/ENTER, the telephone will be called. Press and hold
s
/ENTER
for at least 2 seconds after selecting the name, the default number
of the name will be called. Depending on the connected mobile
phone, this function may not be performed.
Turn the Rotary encoder to select a name or a telephone
number from the list.
25
-EN
To Next Page
Loading...
Need help?
General
