Alpine CDA-137EBT User Manual

-
No indicated disc.
Choose another disc.
•
-
-
-
Communication error or boot error, etc.
A USB Memory is not connected.
Database error or decoder error
You can solve the problem by reconnecting the USB Memory or
changing source.
Make sure the USB Memory device is correctly connected and
the cable is not excessively bent.
You can solve the problem by switching the source.
•
•
-
-
Abnormal current is run to the USB connector device.
A USB device that is not supported by the unit is connected.
You can solve the problem by switching the source.
Connect a USB device that is supported by the unit.
•
•
•
-
No song (le) is stored in the USB Memory
Connect the USB Memory device aer storing songs (les).
•
•
-
A sampling rate/bit rate not supported by the unit is used.
Use a sampling rate/bit rate that is supported by the unit.
•
-
A copy-protected WMA le was played back.
You can only play back non-copy-protected les.
-
-
-
Database error or decoder error.
Communication error or boot error, etc
e iPod/iPhone is not veried.
You can solve the problem by switching the source.
You can solve the problem by reconnecting the iPod/iPhone.
You can solve the problem by reconnecting the iPod/iPhone or
changing source.
-
-
Abnormal current is run to the USB connector device.
A USB device that is not supported by the unit is connected.
You can solve the problem by switching the source.
Connect a USB device that is supported by the unit.
•
•
•
•
•
•
-
e iPod/iPhone is not connected.
Make sure the iPod/iPhone is correctly connected (refer to
"Connections" on page 50). Make sure the cable is not bent
excessively.
Indication for iPod Mode
Indication for USB Memory
•
-
ere are no songs in the iPod/iPhone.
Download songs to the iPod/iPhone and connect to this unit.
45
-EN
•
-
e BLUETOOTH device is not connected.
Connect the BLUETOOTH device.
BLUETOOTH mode
No Unit

Alpine CDA-137EBT Specifications

General

Brand	Alpine
Model	CDA-137EBT
Category	Car Receiver
Language	English