EasyManuals Logo

Alpine CDA-137EBT User Manual

Alpine CDA-137EBT
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Protecting the USB Connection Terminal
• Only a USB Memory or iPod/iPhone can be connected to the USB
connector on this unit. Correct performance using other USB
products cannot be guaranteed.
• If the USB connector is used, be sure to use a USB extension cable
(supplied). A USB hub is not supported.
• Depending on the connected USB Memory device, the unit
may not function or some functions may not be performed.
• e audio le format that can be played back on the unit is
MP3/WMA/AAC.
• Artist/song name, etc. can be displayed, however characters
may not be correctly displayed.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other
countries.
“Made for iPod,” and “Made for iPhone,” mean that an electronic
accessory has been designed to connect specically to iPod, or
iPhone, respectively, and has been certied by the developer to
meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with
iPod, or iPhone may aect wireless performance.
e BLUETOOTH word mark and logos are registered
trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Alpine Electronics, Inc. is under license.
Windows Media, and the Windows logo are trademarks, or
registered trademarks of Microso Corporation in the United
States and/or other countries.
© 2010 Nokia. All rights reserved. Nokia and Works with Nokia
are trademarks or registered trademarks of Nokia Corporation.
“MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and omson.
“Supply of this product only conveys a license for private, non-
commercial use and does not convey a license nor imply any
right to use this product in any commercial (i.e. revenue-
generation) real time broadcasting (terrestrial, satellite, cable and/
or any other media), broadcasting/streaming via internet, intranets
and/or other networks or in other electronic content distribution
systems, such as pay-audio or audio-on-demand applications. An
independent licence for such use is required. For details, please
visit http://www.mp3licensing.com
To prevent malfunction or damage, note the following points.
Read the USB Memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB Memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
Avoid usage or storage in the following locations: Anywhere
in the car exposed to direct sunlight or high temperatures.
Anywhere the possibility of high humidity or corrosive
substances is present.
Fix the USB Memory in a location where driver operation will
not be hindered.
USB Memory may not function correctly at high or low
temperature.
e USB Flash Memory supports only 512 or 2,048 bytes per
sector.
Use only certied USB Memory. Note that even certied USB
Memory, may not function correctly depending on its type or
state.
USB Memory function is not guaranteed. Use USB Memory
according to the terms of agreement.
Depending on the settings of the USB Memory type, memory
state or encoding soware, the unit may not play back or
display properly.
A le that is copy-protected (copyright protection) cannot be
played back.
USB Memory may take time to start playback. If there is a
particular le other than audio in the USB Memory, it may
take considerable time before the le is played back or searched.
e unit can play back “mp3” or “wma” le extension.
Do not add the above extension to a le other than audio
data. is non-audio data will not be recognized. e resulting
playback may contain noise that can damage speakers and/or
ampliers.
It is recommended to back up important data on a personal
computer.
Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, and then
remove the USB device to prevent possible damage to its
memory.
On Handling USB Memory
1
CAUTION
Alpine accepts no responsibility for lost data, etc.,
even if data, etc., is lost while using this product.
®
6
-EN

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpine CDA-137EBT and is the answer not in the manual?

Alpine CDA-137EBT Specifications

General IconGeneral
BrandAlpine
ModelCDA-137EBT
CategoryCar Receiver
LanguageEnglish

Related product manuals