PreseUing
Stations
Manually
Frequency
Search
Function
1 Select the radio band and tune
in
a desired radio
station you wish to store
in
the preset memory.
2 Press and hold, for at least 2 seconds,
anyone
of the
pre.et
button.
(1
through
6)
Into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total
of
18 stations can be stored
in
the preset memory
(6
stations
for
each band; FMI, FM2
and
AM).
•
If
you store a station in a preset memory which already has a station,
the current station will be cleared
and
replaced with the new station,
You can search for a radio station by its frequency.
1 Press and hold
~
lENT
for
at
least 2 seconds In
Radio mode to activate Frequency search mode.
2 Turn the
Rotary
encoder
to select the desired
frequency.
3
*
Press
~
lENT
to receive the selected frequency.
* Operation is not required during HD Radio reception.
• Press
and
hold
~IESCforat
least 2 seconds in the search mode to
cancel.
Or,
the search mode will be canceled
if
no operation is
performed
for
10 seconds.
Receiving
a
Multicast
Station
(HD
Radio
mode
only)
Multicasting is the Ability to broadcast multiple program streams over a
single
FM
frequency. This increases the amount and diversity
of
content
choices. A maximum
of
eight multicast station channels can be selected
on this unit.
SPS:
SUb-program Service
Program Service
MPS:
Main
Program Service
SPS:
Sub-program Service
SPS:
SUb-program Service
Program Service example:
Multicast Radio Station Program
No.
87.7 MHz
NO.1
87.7
MHz
NO.2
87.7 MHz
NO.3
I
I
I
I
87.7
MHz
NO.8
When multicast station is received, the program number
and the SPS Indicator lights up. Press
<iIII
or
~
to select
the desired program service.
Receiving the Multicast Station Program Service.
SPS Indicator
•
If
no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Presetting
Stations
Automatically
Tuning
to
Preset
Stations
1 Press
BAND
repeatedly until the desired band is
displayed.
2 Press
anyone
of
the station
pre.et
button.
(1
through
6)
that has your desired radio station
in
memory.
The display shows the band, preset number and frequency
of the station selected.
1 Press
BAND
repeatedly until the desired radio band
is displayed.
2 Press and hold
TUNE/A.ME
for at least 2 seconds.
The tuner will automatically seek and store 6 strong stations
in the selected band. They will
be
stored into preset buttons
1 to 6
in
order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored
in
preset location
NO.1.
9-EN
PreseUing
Stations
Manually
Frequency
Search
Function
1 Select the radio band and tune
in
a desired radio
station you wish to store
in
the preset memory.
2 Press and hold, for at least 2 seconds,
anyone
of the
pre.et
button.
(1
through
6)
Into which you wish
to store the station.
The selected station is stored.
The
display
shows the band, preset
number
and station
frequency memorized.
• A total
of
18 stations can be stored
in
the preset memory
(6
stations
for
each band; FMI, FM2
and
AM).
•
If
you store a station in a preset memory which already has a station,
the current station will be cleared
and
replaced with the new station,
You can search for a radio station by its frequency.
1 Press and hold
~
lENT
for
at
least 2 seconds In
Radio mode to activate Frequency search mode.
2 Turn the
Rotary
encoder
to select the desired
frequency.
3
*
Press
~
lENT
to receive the selected frequency.
* Operation is not required during HD Radio reception.
• Press
and
hold
~IESCforat
least 2 seconds in the search mode to
cancel.
Or,
the search mode will be canceled
if
no operation is
performed
for
10 seconds.
Receiving
a
Multicast
Station
(HD
Radio
mode
only)
Multicasting is the Ability to broadcast multiple program streams over a
single
FM
frequency. This increases the amount and diversity
of
content
choices. A maximum
of
eight multicast station channels can be selected
on this unit.
SPS:
SUb-program Service
Program Service
MPS:
Main Program Service
SPS:
Sub-program Service
SPS:
Sub-program Service
Program Service example:
Multicast Radio Station Program
No.
87.7 MHz
NO.1
87.7 MHz
NO.2
87.7 MHz
NO.3
I
I
I
I
87.7 MHz
NO.8
When multicast station is received, the program number
and the SPS Indicator lights up. Press
<iIII
or
~
to select
the desired program service.
Receiving the Multicast Station Program Service.
SPS Indicator
•
If
no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Presetting
Stations
Automatically
Tuning
to
Preset
Stations
1 Press
BAND
repeatedly until the desired band is
displayed.
2 Press
anyone
of
the station
pre.et
button.
(1
through
6)
that has your desired radio station
in
memory.
The
display
shows the band, preset
number
and frequency
of the station selected.
1 Press
BAND
repeatedly until the desired radio band
is displayed.
2 Press and hold
TUNE/A.ME
for at least 2 seconds.
The tuner will automatically seek and store 6 strong stations
in the selected band. They will
be
stored into preset buttons
1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes
to the station stored
in
preset location
NO.1.
9-EN
To Next Page
Loading...
