Sound (Beep) Guide Function
Beep ON (Initlsl setting) I Beep OFF
This function will give audible feedback with varying tones depending
upon the
bUllon
pressed.
Turning Mute Mode On/Off (INT Mute)
INT Mute
ON
liNT
Mute OFF(Inltlsl setting)
If a device having the interrupt feature
is
connected, audio will be
automatically muted whenever the interrupt signal
is
received from the
device.
Setting the AUX Mode (V-Link)
AUX IN
ON
I AUX IN OFF (Inltlsl setting)
You
can input TV/video sound by connecting an optional Ai-NETIRCA
Interface cable (KCA-12lB)
or
Versatile Link Terminal (KCA-4IOC) to
this component.
You
can change the AUX Name display when AUX
IN
is
set to ON.
Press
Q.IENT
when AUX
IN
is
set to ON, and select AUX Name by
turning the
Rotary
encoder, and then press
Q.IENT.
After that, turn the
Rotary
encoder
to
select the desired AUX name.
If the KCA-41OC
is
connected,
it
is
possible to select two AUX names.
•
Via
KCA-4lOC, up to 2 external devices with RCA output can be
connected.
In
this case. press
SOURCEI<!>
to
select AUX mode and
then press
BAND
to select yourdesired device.
Changer Name Setting
Chsnger (Inltlsl setting)I USB I Portsble
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M).
You
can set the name to be displayed on the unit
depending on the device to which the USB Adapter for MP3
(KCA-620M) is connected.
Connecting
to
an External Amplifier
Power IC
ON
(Inltlsl setting)I Power IC OFF
When an external amplifier is connected, sound quality can
be improved
by
stopping the power supply
of
the built-in amplifier.
Power
Ie
OFF:
Use this mode when
the
line output
of
this unit
is
used
to
drive
an
external amplifier.
In
this
selting.
the
head unit's internal amplifier
is
turned
OFF
and can not drive speakers.
Rear
left
Rear
right
Front
left
Front
right
:::>c
Amplifier
:::>c
Amplifier
PowerlC
ON:
The
speakers are driven by the built-in
amplifier.
Speakers
SPEAKER
EB
EB
Front
RIGHT FRONT
e
e
right
SPEAKER
e
e
RIGHT REAR
Rear
EB
EB
right
SPEAKER
EB
EB
LEFT REAR
Rear
e
e
left
JSPEAKER
e
~
FrontLEFT FRONT
(f)
left
EB
.
No sound is produced
by
the system when the power output is set to
OFF.
Setting the External Digital
Input
DigltslAUX ONI Dlgltsl AUX OFF(Inltlsl setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX
to
ON
to
enjoy
5.
I-channel
surround sound.
You
can change the Digital AUX name display when Digital AUX is set
to ON. Press
Q.IENT
when Digital AUX is set to ON, and select
Digital AUX name
by
turning the
Rotary
encoder, then press
Q.IENT.
After that, turn the
Rotary
encoder
to select the desired
Digital AUX name.
• Press
SOURCEI<!>
, and select the D.Aux mode,
and
adjust the
volume. etc.
• After input selection is completed,
tum
the ignition
off
and back on
again. Setting
of
the optical digital input switch
is
completed.
• Depending on the connected audio processor, DVD player sound
may continue
to
be output, even though the source is changed to
another one.
If
this occurs. set the DVD player's
power
to
OFF.
AUX+
ON:
Set to
ON
when a portable device
is
connected.
If
SOURCEI<!>
is
pressed and AUX+
is
selected. the
sound of the portable device
is
input to the unit.
AUX+
OFF:
Set
to
OFF
when
an
iPod
is
connected.
You
can change the AUX+ name display when AUX+
is
set to ON.
Press
Q.IENT
when AUX+
is
set to ON, and select AUX+ name
by
turning the
Rotary
encoder, then press
Q.IENT.
After that, turn the
Rotary
encoder
to select the desired AUX+ name.
Setting the AUX+ Level (AUX
IN
GAIN)
Low
(Initlsl
setting)
I High
After selling to ON in "Setting the AUX+ Setup Mode", this setting can
be carried out.
low:
Decreases the external input audio level.
High: Increases the external input audio level.
Setting the AUX+ Setup Mode
AUX+ Setup
ON
I AUX+ Setup OFF (Inltlsl setting)
An
external device (such
as
a portable music player) can be connected
to the iPod Direct connector
of
this unit.
An
iPod DirectIRCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
20-EN
Sound (Beep) Guide Function
Beep ON (Initlsl setting) I Beep OFF
This function will give audible feedback with varying tones depending
upon the
bUllon
pressed.
Turning Mute Mode On/Off (INT Mute)
INT Mute
ON
liNT
Mute OFF(Inltlsl setting)
If a device having the interrupt feature
is
connected, audio will be
automatically muted whenever the interrupt signal
is
received from the
device.
Setting the AUX Mode (V-Link)
AUX IN
ON
I AUX IN OFF (Inltlsl setting)
You
can input TV/video sound by connecting an optional Ai-NETIRCA
Interface cable (KCA-12lB)
or
Versatile Link Terminal (KCA-4IOC) to
this component.
You
can change the AUX Name display when AUX
IN
is
set to ON.
Press
Q.IENT
when AUX
IN
is
set to ON, and select AUX Name by
turning the
Rotary
encoder, and then press
Q.IENT.
After that, turn the
Rotary
encoder
to
select the desired AUX name.
If the KCA-41OC
is
connected,
it
is
possible to select two AUX names.
•
Via
KCA-4lOC, up to 2 external devices with RCA output can be
connected.
In
this case. press
SOURCEI<!>
to
select AUX mode and
then press
BAND
to select yourdesired device.
Changer Name Setting
Chsnger (Inltlsl setting)I USB I Portsble
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M).
You
can set the name to be displayed on the unit
depending on the device to which the USB Adapter for MP3
(KCA-620M) is connected.
Connecting
to
an External Amplifier
Power IC
ON
(Inltlsl setting)I Power IC OFF
When an external amplifier is connected, sound quality can
be improved
by
stopping the power supply
of
the built-in amplifier.
Power
Ie
OFF:
Use this mode when
the
line output
of
this unit
is
used
to
drive
an
external amplifier.
In
this
selting.
the
head unit's internal amplifier
is
turned
OFF
and can not drive speakers.
Rear
left
Rear
right
Front
left
Front
right
:::>c
Amplifier
:::>c
Amplifier
PowerlC
ON:
The
speakers are driven by the built-in
amplifier.
Speakers
SPEAKER
EB
EB
Front
RIGHT FRONT
e
e
right
SPEAKER
e
e
RIGHT REAR
Rear
EB
EB
right
SPEAKER
EB
EB
LEFT REAR
Rear
e
e
left
JSPEAKER
e
~
FrontLEFT FRONT
(f)
left
EB
.
No sound is produced
by
the system when the power output is set to
OFF.
Setting the External Digital
Input
DigltslAUX ONI Dlgltsl AUX OFF(Inltlsl setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX
to
ON
to
enjoy
5.
I-channel
surround sound.
You
can change the Digital AUX name display when Digital AUX is set
to ON. Press
Q.IENT
when Digital AUX is set to ON, and select
Digital AUX name
by
turning the
Rotary
encoder, then press
Q.IENT.
After that, turn the
Rotary
encoder
to select the desired
Digital AUX name.
• Press
SOURCEI<!>
, and select the D.Aux mode,
and
adjust the
volume. etc.
• After input selection is completed,
tum
the ignition
off
and back on
again. Setting
of
the optical digital input switch
is
completed.
• Depending on the connected audio processor, DVD player sound
may continue
to
be output, even though the source is changed to
another one.
If
this occurs. set the DVD player's
power
to
OFF.
AUX+
ON:
Set to
ON
when a portable device
is
connected.
If
SOURCEI<!>
is
pressed and AUX+
is
selected. the
sound of the portable device
is
input to the unit.
AUX+
OFF:
Set
to
OFF
when
an
iPod
is
connected.
You
can change the AUX+ name display when AUX+
is
set to ON.
Press
Q.IENT
when AUX+
is
set to ON, and select AUX+ name
by
turning the
Rotary
encoder, then press
Q.IENT.
After that, turn the
Rotary
encoder
to select the desired AUX+ name.
Setting the AUX+ Level (AUX
IN
GAIN)
Low
(Initlsl
setting)
I High
After selling to ON in "Setting the AUX+ Setup Mode", this setting can
be carried out.
low:
Decreases the external input audio level.
High: Increases the external input audio level.
Setting the AUX+ Setup Mode
AUX+ Setup
ON
I AUX+ Setup OFF (Inltlsl setting)
An
external device (such
as
a portable music player) can be connected
to the iPod Direct connector
of
this unit.
An
iPod DirectIRCA Interface
cable (optional) is required.
A portable music device and an iPod cannot be connected to the iPod
Direct connector at the same time.
20-EN
To Next Page
Loading...
