Setting
the
Auxiliary
Data
Field
Display
(XM
only)
The XM Auxiliary Data Field (ADF) display can
be
switched on
or
off.
There
is
no ADF function for the SIRIUS receiver.
1 Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2 Turn the
Rotary
encoder
to select the XM mode,
and then press
Q,.IENT.
Bluetooth·
J
H General H Display H
XM,.2/SIRIUSoJ
H
HD
Radio,.4 H Bluetooth
.J
Displayed only when
INT
Mute
is
OFF
and
the mode
is
set to other
than Bluetooth Audio.
,.2
Only when
XM
Radio is connected.
.3
Only when SIRIUS Radio
is
connected.
,.4 Only when HD Radio
is
connected.
3 Press Q,./ENT to activate the
XM
ADF mode.
4 Turn the
Rotary
encoder
to select
XM
ADF ONI
OFF, and then press
Q,.IENT.
When setting to ON, Auxiliary Data Field is
displayed
by
pressing VIEW (refer to the "Changing the Display" section
on
page
25.).
5 Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing
~IESC
returns to the previous SETUP mode.
•
If
no operation
is
performed
for
60
seconds, SETUP is canceled.
26-EN
USB
memory
(Optional)
Controlling
USB
memory
(Optional)
A USB memory device may
be
connected to this unit. With a USB
memory device connected to this unit, the audio files will be playable
from this unit.
• The controls on this unit
for
USB memory operation are operative
only when a USB memory
is
connected.
Playing
MP3/WMA/AAC
Files
with
the
USB
memory
(Optional)
If
you connect a USB memory device containing
MP3lWMN
AAC.
these files are playable on this unit.
1 Press SOURCElc!> to switch to the USB mode.
TUNER
-+
XM/SIRIUS·
J
-+
DISC
-+
USB
-+
iPod·
z
/AUX+·
3
-+
Bluetooth Audio·
4
-+
CHANGER·5
-+
TUNER
.J
Only when
XM
Radio
or
SIRIUS Radio is connected.
,.2 Displayed only when the iPod is connected and AUX+ Setup is set to
OFF,
refer to "Sening the AUX+ Setup Mode" (page 20).
oJ
Displayed only when the AUX+ Setup
is
set to ON, refer to "Setting
the AUX+ Setup Mode" (page 20).
,.4 Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 19).
•5 Only when the CD changer is connected.
2
To
pause playback, press
./11.
Pressing
./11
again will resume the playback.
• The root folder
is
displayed as "ROOT" in the Folder Name Search
mode.
• This unit plays backfiles in the USB memory with the same controls
and
modes as playback
of
CDs containing MP3IWMAlAAC.
For
details, refer to "CDIMP3IWMAlAAC" on pages
10
to
13.
• Before disconnecting USB memory. be sure to change to another
source
or
set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recordedfile
is
played back.
Setting
the
Auxiliary
Data
Field
Display
(XM
only)
The XM Auxiliary Data Field (ADF) display can
be
switched on
or
off.
There
is
no ADF function for the SIRIUS receiver.
1 Press and hold F/SETUP for at least 2 seconds to
activate the SETUP selection mode.
2 Turn the
Rotary
encoder
to select the XM mode,
and then press
Q,.IENT.
Bluetooth·
J
H General H Display H
XM,.2/SIRIUSoJ
H
HD
Radio,.4 H Bluetooth
.J
Displayed only when
INT
Mute
is
OFF
and
the mode
is
set to other
than Bluetooth Audio.
,.2
Only when
XM
Radio is connected.
.3
Only when SIRIUS Radio
is
connected.
,.4 Only when HD Radio
is
connected.
3 Press Q,./ENT to activate the
XM
ADF mode.
4 Turn the
Rotary
encoder
to select
XM
ADF ONI
OFF, and then press
Q,.IENT.
When setting to ON, Auxiliary Data Field is
displayed
by
pressing VIEW (refer to the "Changing the Display" section
on
page
25.).
5 Press and hold F/SETUP for at least 2 seconds to
return to normal mode.
• Pressing
~IESC
returns to the previous SETUP mode.
•
If
no operation
is
performed
for
60
seconds, SETUP is canceled.
26-EN
USB
memory
(Optional)
Controlling
USB
memory
(Optional)
A USB memory device may
be
connected to this unit. With a USB
memory device connected to this unit, the audio files will be playable
from this unit.
• The controls on this unit
for
USB memory operation are operative
only when a USB memory
is
connected.
Playing
MP3/WMA/AAC
Files
with
the
USB
memory
(Optional)
If
you connect a USB memory device containing
MP3lWMN
AAC.
these files are playable on this unit.
1 Press SOURCElc!> to switch to the USB mode.
TUNER
-+
XM/SIRIUS·
J
-+
DISC
-+
USB
-+
iPod·
z
/AUX+·
3
-+
Bluetooth Audio·
4
-+
CHANGER·5
-+
TUNER
.J
Only when
XM
Radio
or
SIRIUS Radio is connected.
,.2 Displayed only when the iPod is connected and AUX+ Setup is set to
OFF,
refer to "Sening the AUX+ Setup Mode" (page 20).
oJ
Displayed only when the AUX+ Setup
is
set to ON, refer to "Setting
the AUX+ Setup Mode" (page 20).
,.4 Displayed only when Bluetooth IN is set to ADAPTER, refer to
"Bluetooth Setting" (page 19).
•5 Only when the CD changer is connected.
2
To
pause playback, press
./11.
Pressing
./11
again will resume the playback.
• The root folder
is
displayed as "ROOT" in the Folder Name Search
mode.
• This unit plays backfiles in the USB memory with the same controls
and
modes as playback
of
CDs containing MP3IWMAlAAC.
For
details, refer to "CDIMP3IWMAlAAC" on pages
10
to
13.
• Before disconnecting USB memory. be sure to change to another
source
or
set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recordedfile
is
played back.
To Next Page
Loading...
