This
setting gives you a choice
of
5-band parametric,
or
7-band graphic
equalizer.
Parametric
EO
(Initial setting) H Graphic
EO
PEO:
5-band Parametric
EO
GEQ: 7-band Graphic
EO
OVO
(Video CD)
(MOVIE MX
level
1
to
2):
The dialogue portion of a video is reproduced more clearly.
(OVO
MUSIC):
A
DVD
or Video
CD
contains a large quantity of data such
as
music clip.
MX
uses this data
to
reproduce
the
sound
accurately.
AUX
(MX
level
1):
Choose the
MX
mode (CMPM,
MOVIE,
or MUSIC) that
corresponds
to
the media connected.
• Each music source, such as FM radio,
CD,
and
MP3IWMAlAAC can
have its own MX setting.
• On disks with both MP3IWMAlAAC and CD-DA, when the source
changes from "MP3IWMAlAAC to CD-DA"
or
"CD-DA to
MP3IWMAlAAC", MX-mode switching may delay playback slightly.
• Setting to Non Effect sets MX mode
of
each music source
to
OFF.
• The function is inoperable when DEFEAT is set to
ON.
• There is no MX mode
for
AM
radio.
•
lfan
audio processor with the MXfunction (PXA-H70l. etc.)
is
connected, its own MX processing is applied to the music source.
Since the processor MX senings may not match the head unit, the
audio processor needs to be adjusted. For details, refer
to
the
Owner's Manual
of
the audio processor.
•
"CMPM"
is applied
for
MP3IWMAlAAC and
iPod.
• "SAT" is applied
for
XM radio and SlRlUS radio.
..
settlne
EQlil!iocre~.',-::;·
~i1!~1
CO (MX
level
1
to
3):
CD
mode processes a large amount of data during playback.
MX
takes advantage of this large data quantity
to
reproduce a
more clear, clean output.
CMPMlSAT (MX level
1
to
3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close
to
the original.
NORMAL (Initial setting) H INDIVIDUAL
NORMAL (L=R): Left and right speakers are adjusted
equally.
INDIVIDUAL (UR): Left and right speakers are individually
adjusted.
Depending on the responsecharacteristics
of
the speaker,
care
should
be
taken when setting the response slope
of
the high range speaker to
FLAT in 2.2ch (3WAY)
mode
(see "Adjusting the Crossover Settings"
on page 32), as speaker damage may result.
MAKER'S (Initial setting)
HUSER'S
MAKER'S:
As
protection from possible speaker damage,
FLAT
cannot be set for the response slope of the high
range speaker
in
2.2ch
(3WAY)
mode.
USER'S: The
FLAT
setting
is
possible
in
2.2ch
(3WAY)
mode.
Flat H Pops H Rock H News H Jazz&Blues H
Electrical Dance H Hip Hop&Rap H
Easy
Listening H
Country H Classical H
User1
H User2 H User3 H
User4 H User5 H User6
STEREO
(Initial setting) H MONO
STEREO: Subwoofer stereo (UR) output
MONO: Subwoofer monaural output
10
typical equalizer settings are preset at the factory for a variety
of
musical source material.
• By selecting User's 1
to
6,
you can recall the storedpreset number
in
"Adjusting the Graphic Equalizer Curve" (page 32)
or
"Adjusting
the Parametric Equalizer Curve" (page
32).
You can set the subwoofer output to stereo
or
monaural. Make sure to
set the correct output for your subwoofer type.
When the
Media
Xpander is on, you can adjust the
Media
Xpander level
(refer to page 31).
OFF
(Initial setting) H
ON
MX
(Media
Xpander) makes vocals
or
instruments sound distinct
regardless
of
the music source.
The
FM radio, CD, USB memory and
iPod, will
be able to reproduce the music clearly even in cars with a lot
of
road noise.
Changing the source
to
which
you want
to
apply Media
Xpander.
FM (MX
level
1
to
3):
The medium
to
high frequencies become clearer, and produces
well balanced sound at all frequencies.
You can change the unit, (cm
or
inch)
of
time correction.
TCR
Parameter<cm> (Initial setting) H
TCR
Parameter<inch>
OFF
(Initial setting) H ON
• When Blackout mode is set to
ON,
in
5 seconds after returning to
normal mode, all displays on the unit
will
tum
off.
•
If
any button on the unit is pressed during the blackout mode, the
function
will be displayed
for
5 seconds
to
show the operation before
returning to Blackout mode.
31-EN
This
setting gives you a choice
of
5-band parametric,
or
7-band graphic
equalizer.
Parametric
EO
(Initial setting) H Graphic
EO
PEO:
5-band Parametric
EO
GEQ: 7-band Graphic
EO
OVO
(Video CD)
(MOVIE MX
level
1
to
2):
The dialogue portion of a video is reproduced more clearly.
(OVO
MUSIC):
A
DVD
or Video
CD
contains a large quantity of data such
as
music clip.
MX
uses this data
to
reproduce
the
sound
accurately.
AUX
(MX
level
1):
Choose the
MX
mode (CMPM,
MOVIE,
or MUSIC) that
corresponds
to
the media connected.
• Each music source, such as FM radio,
CD,
and
MP3IWMAlAAC can
have its own MX setting.
• On disks with both MP3IWMAlAAC and CD-DA, when the source
changes from "MP3IWMAlAAC to CD-DA"
or
"CD-DA to
MP3IWMAlAAC", MX-mode switching may delay playback slightly.
• Setting to Non Effect sets MX mode
of
each music source
to
OFF.
• The function is inoperable when DEFEAT is set to
ON.
• There is no MX mode
for
AM
radio.
•
lfan
audio processor with the MXfunction (PXA-H70l. etc.)
is
connected, its own MX processing is applied to the music source.
Since the processor MX senings may not match the head unit, the
audio processor needs to be adjusted. For details, refer
to
the
Owner's Manual
of
the audio processor.
•
"CMPM"
is applied
for
MP3IWMAlAAC and
iPod.
• "SAT" is applied
for
XM radio and SlRlUS radio.
..
settlne
EQlil!iocre~.',-::;·
~i1!~1
CO (MX
level
1
to
3):
CD
mode processes a large amount of data during playback.
MX
takes advantage of this large data quantity
to
reproduce a
more clear, clean output.
CMPMlSAT (MX level
1
to
3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close
to
the original.
NORMAL (Initial setting) H INDIVIDUAL
NORMAL (L=R): Left and right speakers are adjusted
equally.
INDIVIDUAL (UR): Left and right speakers are individually
adjusted.
Depending on the responsecharacteristics
of
the speaker,
care
should
be
taken when setting the response slope
of
the high range speaker to
FLAT in 2.2ch (3WAY)
mode
(see "Adjusting the Crossover Settings"
on page 32), as speaker damage may result.
MAKER'S (Initial setting)
HUSER'S
MAKER'S:
As
protection from possible speaker damage,
FLAT
cannot be set for the response slope of the high
range speaker
in
2.2ch
(3WAY)
mode.
USER'S: The
FLAT
setting
is
possible
in
2.2ch
(3WAY)
mode.
Flat H Pops H Rock H News H Jazz&Blues H
Electrical Dance H Hip Hop&Rap H
Easy
Listening H
Country H Classical H
User1
H User2 H User3 H
User4 H User5 H User6
STEREO
(Initial setting) H MONO
STEREO: Subwoofer stereo (UR) output
MONO: Subwoofer monaural output
10
typical equalizer settings are preset at the factory for a variety
of
musical source material.
• By selecting User's 1
to
6,
you can recall the storedpreset number
in
"Adjusting the Graphic Equalizer Curve" (page 32)
or
"Adjusting
the Parametric Equalizer Curve" (page
32).
You can set the subwoofer output to stereo
or
monaural. Make sure to
set the correct output for your subwoofer type.
When the
Media
Xpander is on, you can adjust the
Media
Xpander level
(refer to page 31).
OFF
(Initial setting) H
ON
MX
(Media
Xpander) makes vocals
or
instruments sound distinct
regardless
of
the music source.
The
FM radio, CD, USB memory and
iPod, will
be able to reproduce the music clearly even in cars with a lot
of
road noise.
Changing the source
to
which
you want
to
apply Media
Xpander.
FM (MX
level
1
to
3):
The medium
to
high frequencies become clearer, and produces
well balanced sound at all frequencies.
You can change the unit, (cm
or
inch)
of
time correction.
TCR
Parameter<cm> (Initial setting) H
TCR
Parameter<inch>
OFF
(Initial setting) H ON
• When Blackout mode is set to
ON,
in
5 seconds after returning to
normal mode, all displays on the unit
will
tum
off.
•
If
any button on the unit is pressed during the blackout mode, the
function
will be displayed
for
5 seconds
to
show the operation before
returning to Blackout mode.
31-EN
To Next Page
Loading...
