F/SETUP Select buttons
(1
through 6)
Controlling
CD
Changer
(Optional)
An optional6-disc
or
l2-disc
CD
Changer may be connected to this unit
if it is Ai-NET compatible. With a
CD
Changer connected to the
Ai-NET input
of
this unit, the
CD
Changer will be controllable from
this unit.
Using the
KCA-400c
(Multi-Changer Switching device)
or
the
KCA-4IOC (Versatile Link Terminal) multiple changers can
be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page
37
for selecting the
CD
Changers.
• The controls on this unit
for
CD
Changer operation are operative
only when a
CD
Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the
CD
changer.
1 Press
SOURCE/<!>
to activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press
BAND
to switch the Disc mode
in
the Changer mode.
2 Press
F/SETUP
to activate Disc Select mode.
Disc Select Mode
Disc Select Mode •
-7
-7
(Disc No.1-·6) (Disc
NO.7
-12)
Disc Select Mode
RPT/M.I.X. Mode
-7
(Disc
No.1-6)
3 Press the disc
select
buttons
(1
through
6)
corresponding to one of the discs loaded
in
the CD
Changer.
The selected disc number appears
in
the display and
CD/MP3 playback starts.
• Afterselecting the desired disc, you can operate
in
the same way as
for
the
CD
player
of
this unit.
For
details. please see the CDIMP31
WMAlAAC section.
* When a 12-disc
CD
changer is connected.
Playing
MP3
Files
with
the
CD
Changer
(Optional)
If
you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs. and CD-RWs containing MP3 files on this unit.
1 Press
SOURCE/<!>
to switch to the MP3 Changer
mode.
2 Press
anyone
of the disc
select
buttons
(1
through
6)
corresponding to one of the discs
loaded
in
the CD Changer.
3
To
pause playback, press
.'11.
Pressing
./11
again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
•
For
operating MP3 with an MP3 compatible CD Changer, refer to
"CDIMP3IWMAlAAC" pages
JO
to
13.
Multi-Changer
Selection
(Optional)
Alpine's Ai-NET system will
suppon
up to 6
CD
Changers. When
operating two
or
more changers. the
KCA-4OOC
(Multi-Changer
Switching device) must be used.
If
you use I Switching device. you can
connect up to 4
CD
Changers. If you use 2 Switching devices. you can
connect up to 6
CD
Changers. When using KCA-4IOC (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1 Press
SOURCE/<!>
on this unit to activate the CD
Changer mode.
Alternatively. press SOURCE on the remote control
(RUE-4202)
to
activate the CD Changer mode.
SOURCE
----j,...----,
---'1::;:.e--'--1f--
BAND
2 Press BAND
on
this unit or the RUE-4202 to activate
the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3 Press BAND until the desired CD Changer indicator
appears on the display.
Alternatively press BAND on the Remote Control until the
desired changer indicator appears on the display.
•
If
the selected CD Changer is not connected. the display will show
"NO
CHANGER (No.)".
•
To
operate the selected changer, see "CDIMP3IWMAlAAC"
(pages
JO
to 13).
•
For
funher
details about the external input (AUX) when using
KCA-4JOC. see "Setting the AUX Mode (V-Link)" on page 20.
37-EN
F/SETUP Select buttons
(1
through 6)
Controlling
CD
Changer
(Optional)
An optional6-disc
or
l2-disc
CD
Changer may be connected to this unit
if it is Ai-NET compatible. With a
CD
Changer connected to the
Ai-NET input
of
this unit, the
CD
Changer will be controllable from
this unit.
Using the
KCA-400c
(Multi-Changer Switching device)
or
the
KCA-4IOC (Versatile Link Terminal) multiple changers can
be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page
37
for selecting the
CD
Changers.
• The controls on this unit
for
CD
Changer operation are operative
only when a
CD
Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the
CD
changer.
1 Press
SOURCE/<!>
to activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press
BAND
to switch the Disc mode
in
the Changer mode.
2 Press
F/SETUP
to activate Disc Select mode.
Disc Select Mode
Disc Select Mode •
-7
-7
(Disc No.1-·6) (Disc
NO.7
-12)
Disc Select Mode
RPT/M.I.X. Mode
-7
(Disc
No.1-6)
3 Press the disc
select
buttons
(1
through
6)
corresponding to one of the discs loaded
in
the CD
Changer.
The selected disc number appears
in
the display and
CD/MP3 playback starts.
• Afterselecting the desired disc, you can operate
in
the same way as
for
the
CD
player
of
this unit.
For
details. please see the CDIMP31
WMAlAAC section.
* When a 12-disc
CD
changer is connected.
Playing
MP3
Files
with
the
CD
Changer
(Optional)
If
you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs. and CD-RWs containing MP3 files on this unit.
1 Press
SOURCE/<!>
to switch to the MP3 Changer
mode.
2 Press
anyone
of the disc
select
buttons
(1
through
6)
corresponding to one of the discs
loaded
in
the CD Changer.
3
To
pause playback, press
.'11.
Pressing
./11
again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
•
For
operating MP3 with an MP3 compatible CD Changer, refer to
"CDIMP3IWMAlAAC" pages
JO
to
13.
Multi-Changer
Selection
(Optional)
Alpine's Ai-NET system will
suppon
up to 6
CD
Changers. When
operating two
or
more changers. the
KCA-4OOC
(Multi-Changer
Switching device) must be used.
If
you use I Switching device. you can
connect up to 4
CD
Changers. If you use 2 Switching devices. you can
connect up to 6
CD
Changers. When using KCA-4IOC (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1 Press
SOURCE/<!>
on this unit to activate the CD
Changer mode.
Alternatively. press SOURCE on the remote control
(RUE-4202)
to
activate the CD Changer mode.
SOURCE
----j,...----,
---'1::;:.e--'--1f--
BAND
2 Press BAND
on
this unit or the RUE-4202 to activate
the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3 Press BAND until the desired CD Changer indicator
appears on the display.
Alternatively press BAND on the Remote Control until the
desired changer indicator appears on the display.
•
If
the selected CD Changer is not connected. the display will show
"NO
CHANGER (No.)".
•
To
operate the selected changer, see "CDIMP3IWMAlAAC"
(pages
JO
to 13).
•
For
funher
details about the external input (AUX) when using
KCA-4JOC. see "Setting the AUX Mode (V-Link)" on page 20.
37-EN
To Next Page
Loading...
