SAT
Radio
Receiver
(Optional)
SAT
Receiver:
XM
or SIRIUS Receiver
When an optional
XM
or SIRIUS Receiver Box
is
connected via the Ai-NET bus, the following
operations may be performed. However, the
XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
SIRIUS Receiver: Verify the features of the connected SIRIUS
Receiver Box Not all SIRIUS Receivers have
identical functions and some may not be
performed on this unit.
For
details about functions,
refer to the SIRIUS Receiver's Owner's Manual.
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each
third party XM
or
SIRIUS radiocomeswith this number.
This
number
is an 8 character (for
XM
Radio)
or
12
character (for
SIRIUS Radio) alphanumeric number.
It
is printed on a label found
on
the SAT Receiver.
It
can also be displayed on
the
screen
of
this
unit in
the
following way.
XM:
1 While receiving a SAT Radio band, press
....
or
~
to
select channel
"0"
for
XM.
The
unit
alternately
displays
channel
No.
"0"
for 2
seconds,
then the
10
number
is
displayed.
Demonstration
(page
21)
becomes
nonfunctional.
2 To cancel
the
10
number
display, select
the
channel
other
than
"0:'
Checking
the
SAT
Radio
ID
Number
3 Press
~
or
..
to
select desired category.
4 Press
....
or
~
to
select
the
desired channel.
Holding
down
....
or
~
will
change
channels
continuously
.
• When using the optional remote control (RUE·4190,
etc).
an SAT
Radio Channel can be directly called up with the numeric keypad
of
the remote control.
While in XM
or
SIRIUS Radio
mode,
enter the
Channel
number
you
want
to call
up
with the
numeric
keypad
on
the remote control.
2 Press Enter on the remote control within 5
seconds
to
receive the Channel.
.L-
~.,'
F/SETUP Preset buttons
(1
through 6)
~IESC
VIEW
Receiving
Channels
with
the
SAT
Radio
Receiver
(Optional)
SIRIUS:
1 While receiving a SAT Radio band, press
....
or
~
to
select channel
"255"
for
SIRIUS.
•
You
cannot use
"0",
"S",
"I",
or
"F"
for
the ID Number (XM radio
Receiver only).
•
You
can check the ID number printed on a label on your third party.
SAT Radio Receiver package.
* When the "Text Scroll" (page 21) is sellO "Auto." the display cannot
be switched by pressing VIEW. The display contents switch
alternately.
Press
VIEW
until
the
10 No. appears In
the
display.
To cancel
the
10
number
display, select
the
channel
to
other
than "255".
Channel
NoJChannel
Name
Category
Name
(Blank)
- - - - -
(Blank)
~
-----
~
f-
~N~
-{
IONo.
Category
Name
Channel
NoiChannel
Name
3
2
1 Press SOURCE/(I)
to
activate
the
SAT Radio mode.
2 Press
BAND
to
select
one
of
the three SAT Radio
Preset Bands.
About SAT Radio
Satellite Radio* is
the
next generation
of
audio entertainment, with
over
100 digital audio channels.
For
a small monthly fee, subscribers
can
hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite.
For
more information, visit
XM's
website
at
www.xmradio.com,
or
SIRIUS'
website at www.sirius.com,
To receive SAT Radio, the separately sold
XM
Direct™
or
SIRIUS
Satellite Radio
Tuner
and an appropriate
Ai-NET
Interface Adapter will
be
required.
For
details, consult you nearest Alpine dealer.
* XM and its corresponding logos are trademarks
of
XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks
of
SIRIUS
Satellite Radio Inc.
Each press changes the band:
XM
mode:
XM
1
~
XM
2
~
XM
3
~
XM
1
SIRIUS mode:
SIRIUS
1
~
SIRIUS 2
~
SIRIUS 3
~
SIRIUS 1
• The SATReceivercontrols
on
this unit are operative only when a SAT
Receiver is connected.
22-EN
SAT
Radio
Receiver
(Optional)
SAT
Receiver:
XM
or SIRIUS Receiver
When an optional
XM
or SIRIUS Receiver Box
is
connected via the Ai-NET bus, the following
operations may be performed. However, the
XM
Receiver and SIRIUS Receiver cannot be
connected at the same time.
SIRIUS Receiver: Verify the features of the connected SIRIUS
Receiver Box Not all SIRIUS Receivers have
identical functions and some may not be
performed on this unit.
For
details about functions,
refer to the SIRIUS Receiver's Owner's Manual.
A unique Radio ID number is required to subscribe to SAT Radio
programming. Each
third party XM
or
SIRIUS radiocomeswith this number.
This
number
is an 8 character (for
XM
Radio)
or
12
character (for
SIRIUS Radio) alphanumeric number.
It
is printed on a label found
on
the SAT Receiver.
It
can also be displayed on
the
screen
of
this
unit in
the
following way.
XM:
1 While receiving a SAT Radio band, press
....
or
~
to
select channel
"0"
for
XM.
The
unit
alternately
displays
channel
No.
"0"
for 2
seconds,
then the
10
number
is
displayed.
Demonstration
(page
21)
becomes
nonfunctional.
2 To cancel
the
10
number
display, select
the
channel
other
than
"0:'
Checking
the
SAT
Radio
ID
Number
3 Press
~
or
..
to
select desired category.
4 Press
....
or
~
to
select
the
desired channel.
Holding
down
....
or
~
will
change
channels
continuously
.
• When using the optional remote control (RUE·4190,
etc),
an SAT
Radio Channel can be directly called up with the numeric keypad
of
the remote control.
While in XM
or
SIRIUS Radio
mode,
enter the
Channel
number
you
want
to call
up
with the
numeric
keypad
on
the remote control.
2 Press Enter on the remote control within 5
seconds
to
receive the Channel.
.L-
~.,'
F/SETUP Preset buttons
(1
through 6)
~IESC
VIEW
Receiving
Channels
with
the
SAT
Radio
Receiver
(Optional)
SIRIUS:
1 While receiving a SAT Radio band, press
....
or
~
to
select channel
"255"
for
SIRIUS.
•
You
cannot use
"0",
"S",
"I",
or
"F"
for
the ID Number (XM radio
Receiver only).
•
You
can check the ID number printed on a label on your third party,
SAT Radio Receiver package.
* When the "Text Scroll" (page 21) is sellO "Auto," the display cannot
be switched by pressing VIEW. The display contents switch
alternately.
Press
VIEW
until
the
10 No. appears In
the
display.
To cancel
the
10
number
display, select
the
channel
to
other
than "255".
Channel
NoJChannel
Name
Category
Name
(Blank)
- - - - -
(Blank)
~
-----
~
f-
~N~
-{
IONo.
Category
Name
Channel
NoiChannel
Name
3
2
1 Press SOURCE/(I)
to
activate
the
SAT Radio mode.
2 Press
BAND
to
select
one
of
the three SAT Radio
Preset Bands.
About SAT Radio
Satellite Radio* is
the
next generation
of
audio entertainment, with
over
100 digital audio channels.
For
a small monthly fee, subscribers
can
hear crystal-clear music, sports, news and talk, coast-to-coast via
satellite.
For
more information, visit
XM's
website
at
www.xmradio.com,
or
SIRIUS'
website at www.sirius.com,
To receive SAT Radio, the separately sold
XM
Direct™
or
SIRIUS
Satellite Radio
Tuner
and an appropriate
Ai-NET
Interface Adapter will
be
required.
For
details, consult you nearest Alpine dealer.
* XM and its corresponding logos are trademarks
of
XM Satellite
Radio Inc.
* SIRIUS and its corresponding logos are trademarks
of
SIRIUS
Satellite Radio Inc.
Each press changes the band:
XM
mode:
XM
1
~
XM
2
~
XM
3
~
XM
1
SIRIUS mode:
SIRIUS
1
~
SIRIUS 2
~
SIRIUS 3
~
SIRIUS 1
• The SATReceivercontrols
on
this unit are operative only when a SAT
Receiver is connected.
22-EN
To Next Page
Loading...
Need help?
General
