Blackout
Mode
On
and
Off
When Blackout mode
is
turned on, all display indications on this unit
will tum off to reduce power consumption. This additional power
enhances the sound quality.
1 Press
SOUND
SETUP
to activate the Sound Setting
mode.
2 Turn the
Rotary
encoder
to select the Black Out
Adjustment mode, and then press
<\/ENT.
SUBW Level·
JI
H Bass·
12
H Treble·
12
H HPF·
12
H Black Out H SUBW Level
3 Turn the
Rotary
encoder
to select the Black Out ON.
OFF
(Initial setting) H ON
4 Press and hold
~/ESC
for at least 2 seconds to
cancel the Sound Setting mode, then after 5 seconds
the Blackout Mode
Is
activated.
• When Black Out
is
set to
ON.
after 5 seconds. all display on the unit
will
tum
off.
•
If
any button on the unit is pressed during the blackout mode. the
function will be displayed
for
5 seconds to show the operation before
returning to Blackout mode.
To
cancel Blackout mode, select OFF in step
3.
.1
I When the subwoofer mode is set to
OFF,
its level cannot be
adjusted. Refer to "Turning Subwoofer ON/OFF" (page
16).
•
12
The
function is inoperable when DEFEAT
is
set to ON.
Turning
Loudness
On/Off
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold
Rotary
encoder
(LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
"LOUD"
indicator
lights.
• When an external audio processor
is
connected. this setting cannot
be made.
• The function
is
inoperable when DEFEAT is set to ON.
16-EN
Turning
Subwoofer
ON/OFF
When the subwoofer is on, you can adjust the subwoofer output level
(refer to page 14),
1 Press and hold
SOUND
SETUP
for at least 2
seconds to activate the Subwoofer selection mode.
2 Turn the
Rotary
encoder
to select the Subwoofer
mode, and then press
<\/ENT.
Subwoofer H SUBW System
3 Turn the
Rotary
encoder
to select Subwoofer
ONI
OFF, and then press
<\
lENT.
OFF
H ON (Initial setting)
4 Press and hold
~/ESC
for at least 2 seconds to
return to normal mode.
•
lfno
operation is performedfor 15 seconds. the unit will return to
normal mode automatically.
Setting
the
Subwoofer
System
When the subwoofer is on, you can select either SystemI or System2
for the desired subwoofer effect.
1 Press and hold
SOUND
SETUP
for at least 2
seconds to activate the Subwoofer selection mode.
2 Turn the
Rotary
encoder
to select the SUBW.
System mode, and then press
<\
lENT.
Subwoofer H SUBW System
3 Turn the
Rotary
encoder
to select Subwoofer
System, and then press
<\
lENT.
Select either System 1 or System 2 for the
desired
subwoofer
effect.
1 (Initial setting)
H 2
System
1:
Subwoofer level changes according the main
volume setting.
System
2:
Subwoofer level change
is
different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
4 Press and hold ~
IESC
for at least 2 seconds to
return to normal mode.
•
lfno
operation is performedfor 15 seconds. the unit will return to
normal mode automatically.
• This function is inoperable when Subwoofer is set
to
OFF.
Blackout
Mode
On
and
Off
When Blackout mode
is
turned on, all display indications on this unit
will tum off to reduce power consumption. This additional power
enhances the sound quality.
1 Press
SOUND
SETUP
to activate the Sound Setting
mode.
2 Turn the
Rotary
encoder
to select the Black Out
Adjustment mode, and then press
<\/ENT.
SUBW Level·
JI
H Bass·
12
H Treble·
12
H HPF·
12
H Black Out H SUBW Level
3 Turn the
Rotary
encoder
to select the Black Out ON.
OFF
(Initial setting) H ON
4 Press and hold
~/ESC
for at least 2 seconds to
cancel the Sound Setting mode, then after 5 seconds
the Blackout Mode
Is
activated.
• When Black Out
is
set to
ON.
after 5 seconds. all display on the unit
will
tum
off.
•
If
any button on the unit is pressed during the blackout mode. the
function will be displayed
for
5 seconds to show the operation before
returning to Blackout mode.
To
cancel Blackout mode, select OFF in step
3.
.1
I When the subwoofer mode is set to
OFF,
its level cannot be
adjusted. Refer to "Turning Subwoofer ON/OFF" (page
16).
•
12
The
function is inoperable when DEFEAT
is
set to ON.
Turning
Loudness
On/Off
Loudness introduces a special low-and high-frequency emphasis at low
listening levels. This compensates for the ear's decreased sensitivity to
bass and treble sound.
Press and hold
Rotary
encoder
(LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
"LOUD"
indicator
lights.
• When an external audio processor
is
connected. this setting cannot
be made.
• The function
is
inoperable when DEFEAT is set to ON.
16-EN
Turning
Subwoofer
ON/OFF
When the subwoofer is on, you can adjust the subwoofer output level
(refer to page 14),
1 Press and hold
SOUND
SETUP
for at least 2
seconds to activate the Subwoofer selection mode.
2 Turn the
Rotary
encoder
to select the Subwoofer
mode, and then press
<\/ENT.
Subwoofer H SUBW System
3 Turn the
Rotary
encoder
to select Subwoofer
ONI
OFF, and then press
<\
lENT.
OFF
H ON (Initial setting)
4 Press and hold
~/ESC
for at least 2 seconds to
return to normal mode.
•
lfno
operation is performedfor 15 seconds. the unit will return to
normal mode automatically.
Setting
the
Subwoofer
System
When the subwoofer is on, you can select either SystemI or System2
for the desired subwoofer effect.
1 Press and hold
SOUND
SETUP
for at least 2
seconds to activate the Subwoofer selection mode.
2 Turn the
Rotary
encoder
to select the SUBW.
System mode, and then press
<\
lENT.
Subwoofer H SUBW System
3 Turn the
Rotary
encoder
to select Subwoofer
System, and then press
<\
lENT.
Select either System 1 or System 2 for the
desired
subwoofer
effect.
1 (Initial setting)
H 2
System
1:
Subwoofer level changes according the main
volume setting.
System
2:
Subwoofer level change
is
different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
4 Press and hold ~
IESC
for at least 2 seconds to
return to normal mode.
•
lfno
operation is performedfor 15 seconds. the unit will return to
normal mode automatically.
• This function is inoperable when Subwoofer is set
to
OFF.
To Next Page
Loading...
