12-EN
Playback
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
• When a disc is already inserted, press SOURCE to switch to the
DISC mode.
2
While playing back MP3, press or to select the desired
folder.
3
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
4
To pause playback, press .
Pressing again will resume playback.
5
To eject the disc, press .
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
•The “” indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs can not be used.
• The track display for MP3 data playback is the file numbers recorded on
the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Repeat Play
1
Press a 4.
The song is played back repeatedly.
a
*1
a
*2
(off) a
*1 Only a track is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3 mode
only)
2
To cancel repeat play, select (off) with the above
procedure.
M.I.X. (Random Play)
1
Press 5s.
The songs are played back in random sequence.
s
*1
s ALL
*2
(off) s
*1 Only files in a folder are played back in random sequence.
(MP3 mode only)
*2 The tracks/files are played back in random sequence.
2
To cancel M.I.X. play, select (off) with the above procedure.
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.
1
Press ENTER during play.
This will set the search mode, and the “” indicator lights up.
2
Turn the Rotary encoder to select the desired track, and
then press ENTER.
This will play the selected track.
Notes
•Press in the search mode to cancel. Or, the search mode is canceled
if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
Folder/File Name Search (concerning MP3)
Folder and file names may be searched and displayed during playback.
1
During MP3 playback, press ENTER to activate the
search mode.
The “” indicator lights up.
2
Turn the Rotary encoder to select Folder Name Search
mode, and then press ENTER.
3
Turn the Rotary encoder to select the desired folder.
4
Press and hold ENTER for at least 2 seconds to play
back the first file in the selected folder.
CD/MP3
SOURCE/
Rotary encoder/
/ENTER
4 5
Folder Name Search mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
