Alpine CDE-136BT User Manual

29-EN
Notes
• In the Tag search mode, after pressing and holding ENTER for at
least 2 seconds while in each hierarchy (except Song and File hierarchy),
all songs of the selected hierarchy are played back.
• After selecting [ALL] in the Tag search mode with “
*
”, press and hold
ENTER for at least 2 seconds to play back all songs in the selected
search mode.
• Even if the songs belong to the same playlist, they may be saved in
different BANK.
• While in the search mode, if you press and hold  for at least
2 seconds, or no operation is performed for 60 seconds, the search mode
is canceled.
• The root folder of Flash Memory is displayed as “\ROOT”.
• When the bank is changed during Repeat play, the Repeat play will be
canceled.
• In the search mode, pressing  will return to the previous mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
canceled.
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 32.
• In the Tag search mode, a search can be made quickly by Alphabet
Search function to find the desired artist or song, etc. For details, refer to
“Alphabet Search Function (Tag search mode only)” on page 30.
• In the (FILE NAME) search mode, a search can be made quickly by
USB Skip function to find the desired folder/file. For details, refer to
“Setting the USB Skip function” on page 20.
• When searching for a song, artist, etc., in Flash Memory, the display
order may be incorrect if the character code of the file tag information is
mixed.
Repeat Play
1 Press a 4.
The song is played back repeatedly.
When a song is searched by Tag information
a
*1
 a
*2
 a
*3
 (off )  a
When a folder/file is searched by (FILE NAME) mode
a
*1
 a
*4
 (off)  a
*1 Only a file is repeatedly played back.
*2 According to the artist information of the current song, a playlist
about all the songs with the same artist of the Bank are made
into a playlist, which then starts to play back.
*3 According to the album information of the current song, a
playlist about all the songs with the same album of the Bank are
made into a playlist, which then starts to play back.
*4 Only files in a folder are repeatedly played back.
2 To cancel repeat play, select (off) with the above
procedure.
Note
• During repeat play, setting M.I.X. to ON will cancel the repeat play.
M.I.X. (Random Play)
1 Press 5 s.
The songs are played back in random sequence.
When a song is searched by Tag information
s
*1
 s ALL
*2
 (off)  s
When a folder/file is searched by (FILE NAME) mode
s
*3
 s ALL
*4
 (off)  s
*1 Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
*2 All songs in the current Bank are played back in random
sequence. Any one song does not play back again until all songs
have been played back.
*3 All songs in the current folder are played back in random
sequence. Any one song does not play back again until all songs
have been played back.
*4 All songs in the Flash Memory are played back in random
sequence. Any one song does not play back again until all songs
have been played back.
2 To cancel M.I.X. play, select (off) with the above procedure.
Notes
• When a song is played back during Random (M.I.X.) play in the USB
mode, the song can be played back again randomly even if not all songs
in the current Bank or Flash Memory have been played back.
• During M.I.X. play, setting repeat play to ON will cancel the M.I.X.
play.
• During repeat play, etc., the track number display for M.I.X. play may
be incorrect.
Select Playlist/Artist/Album/Genre/
Composer/Folder
Playlist/Artist/Album/Genre/Composer/Folder can be easily changed.
For example, if you listen to a song from a selected album, the album can
be changed.
Press  or  to select the desired Playlist/Artist/Album/
Genre/Composer/Folder.
Notes
• If the song search mode was used to select a song, this function is
inactive.
• If an album is selected during an artist search, other albums by that
artist are searchable.
• This function is inactive during M.I.X. ALL/M.I.X. Song playback.
• This function is inactive during RPT ALBUM/RPT ARTIST playback.

Alpine CDE-136BT Specifications

General

Audio system	4.0
MP3 playback	Yes
DVD Audio playback	No
Playback disc formats	CD audio
Audio formats supported	AAC, CD-A, MP3, WMA
Video formats supported	Not supported
AM band range	531 - 1602 kHz
FM band range	87.5 - 108 MHz
LW band range	153 - 281 kHz
Supported radio bands	DAB+, FM, LW, MW
Preset stations quantity	48
Impedance	4 Ω
Output power	200 W
RDS features	AF, PTY, RT, TA, TP
Product color	Multicolor
Volume control	Digital
Frequency range	5 - 20000 Hz
Disc types supported	CD, CD-RW
Audio output channels	4.0 channels
Equalizer bands quantity	3
Signal-to-Noise Ratio (SNR)	105 dB
Display type	LCD
Display digits	14 digits
Display number of lines	1 lines
Display number of colors	Monochrome
USB version	2.0
Bluetooth version	3.0+HS
Bluetooth profiles	A2DP, AVRCP, HFP, HSP
USB ports quantity	1
Digital audio optical out	0
Apple docking compatibility	iPad, iPod
Cables included	USB
Material	Metal, Plastic
File format system	FAT 16/32
Power requirements	11 - 16 VDC
Compatible products	iPhone / iPod / Nokia
Remote control type	IR
Key illumination color	Multi
Number of optical discs	1 discs
Operating temperature (T-T)	-10 - 60 °C

Weight and Dimensions

Depth	161 mm
Width	178 mm
Height	50 mm
Weight	1500 g