Alpine PXE-R80-8 - Description of Mobile APP - Frequency; Combination

13
1
Active or passive
output
Keep the default setting as "Passive".
Warning: if changed, you will lose the sound mixer setting of this channel.
2
Input channel
Push the fader left and right or press "+" and "-" to adjust the volume of each audio source
in the channel to achieve the purpose of sound mixing and frequency mixing.
Caution: It is strongly recommended to set the total volume of a channel to 100 to avoid clipping.
Description of mobile APP - Frequency combination
Switch prompt
If you switch mode, the set data will be
cleared. Are you sure to continue?
Cancel
OK
Frequency combination
Passive
input
Active
input
High
voltage
level 1
High
voltage
level 2
High
voltage
level 3
High
voltage
level 4
High
voltage
level 5
High
voltage
level 6
Low voltage
level left