EasyManua.ls Logo

Alpine PXE-R80-8 - Operating Instructions; Type of Precautions

Alpine PXE-R80-8
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
Type of precautions
Prohibition
Indicates a prohibited action (must not be
performed).
Prohibition
Indicates that disassembly is prohibited.
Mandatory
Indicates a mandatory operation (must be
performed).
Indicates that it should draw your close
attention.
Otherwise, it may result in personal injury or
damaged product. Please return the product to the
authorized Alpine dealer or nearby Alpine service
center to repair.
Otherwise, it may lead to an accident like fire, etc.
It needs professional expertise and experiences to
wire and install the product. Please contact the dealer
from whom you bought the product to install it for
safety.
Otherwise, it may result in an accident, fire or electric
shock.
If ingested, it may result in severe damage. Once
ingested, please seek medical attention immediately.
Any function that may influence your attention should
be used only when the vehicle is stopped completely.
To use these functions, please first stop your vehicle
in a safe area. Otherwise, it may result in an accident.
During driving, you must maintain
the volume at a level such that the
noise outside can still be heard.
It is very dangerous not to clearly hear an emergency
vehicle alarm and road warning signal (such as a
railway crossing) and may result in an accident.
Moreover, a too large volume may damage your
hearing.
Product cleaning
Please clean the product regularly with a soft dry
cloth. For any dirt difficult to clean, only water can be
used to soak the cloth. Any other solvents may lead to
dissolution.
Temperature
Before starting the device, please ensure that the
temperature inside the vehicle is between +60°C and -
20°C.
Repair
In case of problems, please do not repair them by
yourself. Please return the product to the authorized
Alpine dealer or nearby Alpine service center to
repair.
System matching
When PXE-R80-8 is used with active division mode
to assign signals for speakers, please ensure that the
frequency division point of high pitch is above 1500
Hz to avoid damage to high pitch speakers
Installation site
The device cannot be installed at the following
locations:
Under direct sunlight and near a hot source.
With high humidity and near a water source.
Dusty sites.
Environments with violent vibration.
Warning
Caution
Operating Instructions

Related product manuals